Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920377BTC
In stock
Dolphin Components
Dolphin Components DC-1/2N Conduit, White, 100 pcs
White nylon cable clamps secure 1/2-inch bundles and mount with 0.2031-inch holes, supplied in a 100-piece pack
- TypeCable Management & Conduit
- Secure 1/2 in bundles with 100 white nylon clamps
- Nylon 6/6 resists heat from 40 to 85 °F
- 2031 in mounting hole fits standard fasteners
- Slim 0.063 in profile suits tight spaces
- 100-piece pack covers large wiring jobs
Cable clamp for 1/2 in bundles
The Dolphin Components DC-1/2N conduit secures cables with a 1/2 in clamping diameter. Made from 6/6 nylon, it fits a 0.2031 in mounting hole. The clamp band is 1/2 in wide and 0.063 in thick. Supplied in a 100-piece pack for professional wiring jobs.
Replaces loose ties or undersized clamps
This clamp upgrades installations where cables shift under vibration. The rigid nylon band holds a 1/2 in bundle firmly without cutting insulation. The jump is worth it when a permanent, screw-mounted fixing is required instead of temporary straps.
Limited to 1/2 in diameter and screw mounting
The clamp only accepts bundles up to 1/2 in, so larger looms need a different size. It requires a drilled hole for the 0.2031 in mounting screw. Operating range is 40 to 85 degrees Fahrenheit. No adhesive backing or snap-in feature is provided.
Highlights
- Secure 1/2 in bundles with 100 white nylon clamps
- Nylon 6/6 resists heat from 40 to 85 °F
- 2031 in mounting hole fits standard fasteners
- Slim 0.063 in profile suits tight spaces
- 100-piece pack covers large wiring jobs
Specifications
| Type | Cable Management & Conduit |
|---|---|
| Brand | DOLPHIN COMPONENTS |
Questions about this item
What mounting hole size do these 1/2 in cable clamps require?
Each clamp has a mounting hole diameter of 0.2031 in, so a #10 or M5 screw fits. Drill the panel to that size before fastening.
How do I install the clamps without cracking the nylon?
Insert the screw through the 0.2031 in hole, position the 1/2 in band around the bundle, and tighten by hand. Over-torquing splits the 0.063 in thick clamp wall.
Will the white nylon become brittle in a hot engine bay?
The 6/6 nylon is rated for 40 to 85 °F. Above that range the material loses flexibility and may need replacement sooner.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
