We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray rectangular charging hub with three battery slots on top

DJI

DJI Matrice 4D 240W Charging Hub Sequential 3-Battery

SKU CH-MWWZ-697J1

Charges three Matrice 4D batteries sequentially at 240W with standard and standby modes

  • ColorGray
  • TypeReady to Fly Drone
  • CompatibilityDJI DJI Matrice 4D
  • Charges three batteries sequentially from one hub
  • 240W output reduces total wait time for flight operations
  • Intelligent logic picks the fastest-to-full battery first
  • Standard mode reaches 100% SOC for maximum endurance
  • Standby mode stops at 90% SOC to extend lifespan

Professional Drone Charging Hub

The DJI Matrice 4D Series 240W Charging Hub is built for operators who rely on the Matrice 4D platform for surveying, inspection, search and rescue or industrial monitoring. It manages three intelligent flight batteries in a single unit, removing the need to swap cables between sorties. Used with a compatible power source, the hub automates the charging queue so crews can focus on the mission rather than battery logistics.

Sequential Power Delivery Under Load

The hub accepts an SDC input of 16.8V to 25.5V at up to 12.1A and delivers a maximum output of 240W. It charges batteries one after another, always selecting the pack that will reach full capacity first to minimise total downtime. Standard Mode fills every cell to 100% SOC for maximum flight endurance, while Standby Mode stops at 90% SOC to reduce wear during daily operations.

Simple Integration With One Limitation

Installation is limited to connecting the hub to a suitable charger and seating up to three Matrice 4D or 4TD batteries; no firmware setup or configuration is required. The sequential logic means only one battery charges at a time, so operators needing simultaneous multi-pack charging will find the hub cannot meet that requirement.

Highlights

  • Charges three batteries sequentially from one hub
  • 240W output reduces total wait time for flight operations
  • Intelligent logic picks the fastest-to-full battery first
  • Standard mode reaches 100% SOC for maximum endurance
  • Standby mode stops at 90% SOC to extend lifespan

Specifications

BrandDJI
ModelMatrice 4D Series 240W Charging Hub
ColorGray
TypeReady to Fly Drone
CompatibilityDJI DJI Matrice 4D

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.