We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DJI Matrice 400 third gimbal connector with four M3 screws

DJI

DJI Matrice 400 Third Gimbal Connector drone accessory

SKU CH-BY7E-WB6HW

Enables a third gimbal payload on the Matrice 400 via E-Port V2 with included screws

  • ColorBlack
  • TypeThird Gimbal Connector
  • CompatibilityMatrice 400, DJI
  • SpecificationsMatrice 400 Third Gimbal Connector, Third Gimbal Connector,
  • FeaturesThird Gimbal Connector
  • Enables third-gimbal mounting on Matrice 400 via E-Port V2
  • Connects to E3 or E4 port for underside payload attachment
  • Includes four M3 screws for secure screw-lock fastening
  • Waterproof rating follows IEC 60529 standard of attached payload
  • Genuine DJI replacement part restores original gimbal connection capability

DJI Matrice 400 Third Gimbal Connector

This genuine DJI accessory adds a third gimbal mounting point to the Matrice 400 airframe. It connects to the E3 or E4 port on the E-Port V2 to enable underside payload attachment. The connector supports quick-release loads up to 3 kg and screw-lock fastening up to 6 kg. It is built for operators who need to expand the Matrice 400's gimbal capacity.

Compatibility check before ordering

Verify that your aircraft is a DJI Matrice 400; this connector is explicitly not compatible with the Matrice 350 RTK or any other drone models. Confirm the E-Port V2 is present and that the intended payload mounts to the E3 or E4 interface. Ensure the airframe is powered off before installation begins. The waterproof rating depends on the specific payload attached, referenced against the IEC60529 standard.

Build integration and payload support

The connector installs using the four included M3 screws and requires no complex tools. Once fitted, it frees up the top mounting positions by moving a gimbal to the underside of the airframe. It maintains a stable link between the payload and the flight system for smooth operation. The package contains the connector unit and screws only; the payload itself is supplied separately.

Highlights

  • Enables third-gimbal mounting on Matrice 400 via E-Port V2
  • Connects to E3 or E4 port for underside payload attachment
  • Includes four M3 screws for secure screw-lock fastening
  • Waterproof rating follows IEC 60529 standard of attached payload
  • Genuine DJI replacement part restores original gimbal connection capability

Specifications

BrandDJI
ModelMatrice 400 Third Gimbal Connector
Part NumberMatrice 400 Third Gimbal Connector
ColorBlack
TypeThird Gimbal Connector
CompatibilityMatrice 400, DJI
SpecificationsMatrice 400 Third Gimbal Connector, Third Gimbal Connector, DJI, Matrice 400, Black, China, 1, Unit
FeaturesThird Gimbal Connector

Questions about this item

What comes in the box and what else do I need to attach it?

The box contains one Third Gimbal Connector and four M3 screws. You need a compatible payload and must connect the unit to the E3 or E4 port on the Matrice 400 E-Port V2.

Which version of this connector fits my aircraft?

This connector is only compatible with the DJI Matrice 400. It does not fit the Matrice 350 RTK or any other model.

What does the 3 kg and 6 kg rating mean when the connector is installed?

The quick-release port supports payloads up to 3 kg while the screw-lock fastening handles up to 6 kg. The waterproof rating depends on the attached payload per IEC60529.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.