We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular circuit board with multiple connectors and mounting holes, part 30 for Inspire 1 V2.0

DJI

DJI Inspire 1 V2.0 Fast-mounting Gimbal Port PCBA Part 30

SKU CH-6KN9-PFPGH

Fast-mounting gimbal port PCBA for DJI Inspire 1 V2.0 drones using Zenmuse X3 or X5 cameras

  • ColorBlack
  • TypeFast-mounting Gimbal Port
  • CompatibilityZenmuse X3/X5 camera
  • Genuine DJI replacement part for reliable repairs
  • Fast-mounting design simplifies gimbal port installation
  • Compatible with Inspire 1 and V2.0 drones
  • Works with Zenmuse X3 and X5 cameras
  • New condition ensures full operational performance

Part 30 Fast-mounting Gimbal Port

This is a genuine DJI replacement printed-circuit board assembly for the Inspire 1 and Inspire 1 V2.0 drones. It provides the mechanical and electrical interface that locks a Zenmuse X3 or X5 camera to the airframe. The part is supplied new and tested, ready for installation by a qualified technician or experienced operator.

Compatibility limited to Zenmuse X3 and X5 cameras

The board works only with the Inspire 1 or Inspire 1 V2.0 platform paired with a Zenmuse X3 or X5 camera. It will not fit the Inspire 2 airframe and it will not connect to the Zenmuse X5R or X5S camera systems. No other drone models or camera payloads are supported by this component.

Suits owners repairing a damaged gimbal mount

Pilots who need to restore the quick-release function for an X3 or X5 gimbal should use this part. Operators flying an Inspire 2 or using X5R and X5S cameras must source a different mounting assembly because this PCBA is physically and electrically incompatible with those configurations.

Highlights

  • Genuine DJI replacement part for reliable repairs
  • Fast-mounting design simplifies gimbal port installation
  • Compatible with Inspire 1 and V2.0 drones
  • Works with Zenmuse X3 and X5 cameras
  • New condition ensures full operational performance

Specifications

BrandDJI
ModelInspire 1 Fast-mounting Gimbal Port
ColorBlack
TypeFast-mounting Gimbal Port
CompatibilityZenmuse X3/X5 camera

Questions about this item

How does the Part NO.30 gimbal port fit into an Inspire 1 V2.0 build?

This PCBA is the fast-mounting gimbal port designed for the Inspire 1 and V2.0 airframes. It connects the Zenmuse X3 or X5 camera to the drone’s flight controller and power bus. The board seats directly onto the gimbal mounting rails and locks with the aircraft’s quick-release mechanism.

What camera interface does the port use and what does it limit?

The port carries the proprietary DJI gimbal connector used by the Zenmuse X3 and X5 cameras. It passes video, telemetry and control signals for those models only; it does not support the X5R, X5S or any Inspire 2 camera system.

What physical mounting points does the board need on the airframe?

The board aligns with the four fast-mount brackets on the Inspire 1 and V2.0 gimbal rail. No screws are included, so you reuse the original mounting hardware from the removed port. The connector orientation matches the factory layout exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.