We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DJI Mic 3 kit with two transmitters, one receiver and a charging case

DJI

DJI CP.RN.00000480.03 Mic 3 2TX 1RX Charging Case action camera accessory

SKU CH-STXQ-K76KH MPN CP.RN.00000480.03

Wireless dual-transmitter kit with omnidirectional mics, automatic clipping prevention and a charging case delivering 28 hours total runtime

  • DimensionsTransmitter 28.77×28.34×16.35 mm (L×W×H) (with magnet) Recei
  • WeightTransmitter 16 g (with magnet) Receiver 25.1 g Charging Case
  • SpecificationTransmitter Battery Type: Li-ion Battery Capacity: 137 mAh B
  • FeatureGeneral Polar Pattern: Omnidirectional Frequency Response: L

Model DJI Mic 3

Option 2TX + 1 RX + Charging Case

  • Omnidirectional capture records sound from every direction
  • Automatic mode prevents clipping during dynamic outdoor scenes
  • Three voice presets tailor tone for recording, streaming or teaching
  • Transmitter runs 8 hours, receiver 10 hours, case adds 28 hours total
  • Five-minute charge delivers two hours of immediate use

DJI Mic 3 two-transmitter kit

This kit includes two transmitters, one receiver and a charging case for wireless audio capture with action cameras and other devices. Each transmitter weighs 16 g and measures 28.77×28.34×16.35 mm with its magnet. The receiver weighs 25.1 g and measures 53.85×28.69×22.00 mm. The case measures 106.30×42.50×59.20 mm and weighs 164.1 g.

Easy magnetic or clip attachment

Transmitters attach magnetically or with a clip for flexible wearing. The charging case stores and charges both transmitters and the receiver together, enabling instant setup. A five-minute charge provides two hours of operation; full charge takes about 50 minutes. Operating temperature range is -10° to 45° C.

Check device audio input compatibility

The receiver outputs audio to your recording device; verify that your camera or recorder accepts the receiver's connector type. The system uses omnidirectional polar pattern with selectable low-cut at 100 Hz and frequency response up to 20 kHz encoded or 24 kHz lossless. Three voice tone presets are available: Regular, Rich and Bright.

Highlights

  • Omnidirectional capture records sound from every direction
  • Automatic mode prevents clipping during dynamic outdoor scenes
  • Three voice presets tailor tone for recording, streaming or teaching
  • Transmitter runs 8 hours, receiver 10 hours, case adds 28 hours total
  • Five-minute charge delivers two hours of immediate use

Specifications

BrandDJI
ModelDJI Mic 3 (2 TX + 1 RX + Charging Case)
Part NumberCP.RN.00000480.03
DimensionsTransmitter
28.77×28.34×16.35 mm (L×W×H) (with magnet)
Receiver
53.85×28.69×22.00 mm (L×W×H)
Charging Case
106.30×42.50×59.20 mm (L×W×H)
WeightTransmitter
16 g (with magnet)
Receiver
25.1 g
Charging Case
164.1 g (charging case only)
SpecificationTransmitter
Battery Type: Li-ion
Battery Capacity: 137 mAh
Battery Energy: 0.531 Wh
Battery Voltage: 3.87 V
Charging Specification: Max 5 V
Charging Temperature: 5° to 45° C (41° to 113° F)
Operating Temperature: -10° to 45° C (14° to 113° F)
Charging Time: Approx. 50 minutes
Operating Time: 8 hours
Receiver
Battery Type: Li-ion
Battery Capacity: 275 mAh
Battery Energy: 1.065 Wh
Battery Voltage: 3.87 V
Charging Specification: Max 5 V
Charging Temperature: 5° to 45° C (41° to 113° F)
Operating Temperature: -10° to 45° C (14° to 113° F)
Charging Time: Approx. 50 minutes
Operating Time:
FeatureGeneral
Polar Pattern: Omnidirectional
Frequency Response:
Low Cut Off: 20 Hz-20 kHz (encoded)
Low Cut Off: 20 Hz-24 kHz (lossless)
Low Cut On: 100 Hz-20 kHz (encoded)
Low Cut On: 100 Hz-24 kHz (lossless)
Microphone Sensitivity: Microphone Capsule: -36±1 dBV@1 kHz, 94 dB SPL
Signal-to-Noise Ratio (SNR): 72 dB
Maximum Sound Pressure Level (SPL): 126 dB SPL@1% THD, 130 dB SPL@10% THD
Sampling Frequency: 48 kHz
Bit Depth: 32-bit float/24-bit (switchable)
Equivalent Noise: 22 dBA
Monitor Interface Output Power: Max Output Power: 20 mW@1 kHz, 32 O
Shipping weight0.02 kg
Package size29 × 28 × 17 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the DJI Mic 3 transmitters and receiver are paired and recording after I take them out of the charging case?

The transmitters and receiver link automatically when removed from the case; check the status LEDs on each unit and the receiver display to verify connection and recording status.

What accessories are included with the DJI Mic 3 (2 TX + 1 RX + Charging Case) and what must I purchase separately?

The box contains two transmitters, one receiver, the charging case and a carrying pouch; cables, mounts or adapters for specific cameras are not included.

Should I choose the 2-transmitter kit or a single-transmitter version for interviews with two people?

This CP.RN.00000480.03 kit already includes two transmitters and one receiver, which is the configuration needed for two-person interviews.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.