We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular USB tester with .96 inch IPS color screen showing voltage current power

diymore USB Tester 4-25V 5.0A 0.96in IPS PD3.1 QC2.0/3.0

SKU CH-VEMT-MKXEH

Measures voltage, current, power and capacity on USB-C and USB-A ports with a .96 inch IPS display and detects PD 3.1, QC 2.0 and QC 3.0 protocols

  • FeaturesUsb-c Power Meter Tester, User Manual, Pd3.1, Usb-c, false
  • Height2.5 L x 1.5 W x 1.5 H inches
  • Width2.5 L x 1.5 W x 1.5 H inches
  • Length2.5 L x 1.5 W x 1.5 H inches
  • Sports Team1 Piece
  • TypeVoltage
  • 96in IPS colour display shows voltage current power and charging protocols
  • Measures 4-25V up to 5.0A to verify charger and cable performance
  • Detects PD3.1 QC2.0 QC3.0 fast-charge standards for compatibility checks
  • Pass-through design lets you monitor live charging without interrupting device use
  • Compact 2.5 by 1.5 by 1.5in form factor fits in any tool bag or bench setup

USB tester with 0.96in IPS display

This USB tester measures voltage from 4 to 25 volts and current up to 5.0 amps on a 0.96 inch IPS colour screen. It shows real-time power, energy, capacity and fast-charging protocol status for PD3.1, QC2.0 and QC3.0. The compact pass-through design fits between a charger and a device so you can monitor charging without interrupting use.

For engineers and hobbyists checking USB power

The tester suits anyone who needs to verify charger output, cable quality or device power draw on USB-C and USB-A ports. It is not for users who require logging to a computer, automated test sequences or measurements beyond the 25 volt and 5.0 amp limits shown on the display.

Sustained monitoring stays readable during long

The IPS panel keeps voltage, current and protocol data visible during extended charging sessions without the flicker or wash-out seen on smaller LED modules. Pass-through operation means the unit itself adds negligible resistance, so readings remain stable while a phone, tablet or power bank draws continuous current.

Highlights

  • 96in IPS colour display shows voltage current power and charging protocols
  • Measures 4-25V up to 5.0A to verify charger and cable performance
  • Detects PD3.1 QC2.0 QC3.0 fast-charge standards for compatibility checks
  • Pass-through design lets you monitor live charging without interrupting device use
  • Compact 2.5 by 1.5 by 1.5in form factor fits in any tool bag or bench setup

Specifications

Branddiymore
FeaturesUsb-c Power Meter Tester, User Manual, Pd3.1, Usb-c, false
Height2.5 L x 1.5 W x 1.5 H inches
Width2.5 L x 1.5 W x 1.5 H inches
Length2.5 L x 1.5 W x 1.5 H inches
Sports Team1 Piece
TypeVoltage

Questions about this item

What type of USB ports does the diymore tester need on my charger and device to function?

The tester has a pass-through design with USB Type-C and USB Type-A connections, so your charger and device must use one of these port types.

Will the 4-25V 5.0A range safely measure my older 5V 2.0A phone charger?

Yes, the 4-25V voltage and 0-5.0A current ranges fully cover a standard 5V 2.0A charger, and the tester detects QC2.0 and QC3.0 protocols used by many older devices.

How can I verify the 0.96in IPS display is showing correct live data after I plug it in?

The colour screen should immediately show real-time voltage, current, power, energy, capacity, and the detected fast-charge protocol such as PD3.1 or QC3.0.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.