We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white plastic USB-C fan controller with rotary knob

diymore A1_GBAA0052-002_US USB Type-C PWM fan control 5V 2A

SKU CH-GBZJ-VRTZ0 MPN A1_GBAA0052-002_US

USB Type-C PWM fan controller with rotary knob for infinite 5V 2A speed adjustment and built-in protection circuitry

  • Product nameType C USB PWM Fan Controller diymore
  • motor size2.6 in x 8 in x 0.9 in
  • type of bulbDigital
  • voltage5 volts
  • featuresDigital
  • weight0.068 kilograms
  • Infinite speed adjustment via rotary knob
  • USB and Type-C ports for broad device compatibility
  • Operates at 5V DC with 2A current capacity
  • Built-in USB protection circuitry prevents device damage
  • Compact portable design with extendable cable socket

USB Type-C PWM Fan Controller

The diymore A1_GBAA0052-002_US is a compact fan speed controller that draws power from a USB Type-C or USB Type-A port. It provides 5 V DC at up to 2 A for a single PWM fan, with speed set by a rotary knob that turns clockwise to increase speed and counter-clockwise to decrease or power off. The plastic housing measures 3.0988 cm x 8.9916 cm x 11.9888 cm and weighs 0.068 kilograms.

Makers and hobbyists adding variable cooling

This unit suits makers, hobbyists and anyone wanting stepless speed control for a 5 V PWM fan powered from a laptop, phone charger or power bank. The extendable cable socket allows flexible placement. Buyers who need to drive fans with a different voltage requirement or who require automated temperature-based control should look at other solutions.

5 V 2 A PWM output rating

The controller delivers a maximum of 5 V at 2 A (5 W) to the fan header, so the connected fan must be rated for 5 V operation and draw no more than 2 A. Exceeding this current limit will trip the built-in USB protection circuitry.

Highlights

  • Infinite speed adjustment via rotary knob
  • USB and Type-C ports for broad device compatibility
  • Operates at 5V DC with 2A current capacity
  • Built-in USB protection circuitry prevents device damage
  • Compact portable design with extendable cable socket

Specifications

Branddiymore
ModelA1_GBAA0052-002_US
Product nameType C USB PWM Fan Controller diymore
motor size2.6 in x 8 in x 0.9 in
type of bulbDigital
voltage5 volts
featuresDigital
weight0.068 kilograms
descriptionType C USB PWM Fan Controller, Digital, Plastic, White, diymore, A1_GBAA0052-002_US
finishPlastic
materialPlastic
dimensions3.0988 cm x 8.9916 cm x 11.9888 cm

Questions about this item

How do I install the diymore A1_GBAA0052-002_US fan controller and what step is often missed?

Plug the controller into a USB Type-C or Type-A port supplying 5V 2A, connect the fan to the output socket, then turn the rotary knob clockwise to start; the step often missed is verifying the power source can deliver the full 2A rating.

What maintenance or replacement will the diymore A1_GBAA0052-002_US need later?

No scheduled maintenance is required; if the rotary knob or USB protection circuitry fails after extended use, the entire controller would need replacement.

What limit appears first on the diymore A1_GBAA0052-002_US during sustained use?

The 5V 2A (5W) power ceiling is the first limit; a fan drawing more than 2A will trigger the built-in protection and shut down the output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.