We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular neodymium magnet block 40 by 40 by 20 mm

DIYMAG F404020 Neodymium Magnet 40x40x20mm

SKU CH-Y9DS-MSMZ5

A 40 by 40 by 20 millimetre N52 neodymium block magnet rated to 80°C for industrial lifting and holding tasks

  • TypeMaterial Handling; Pulling & Lifting Equipment; industrial-r
  • ColorSilver
  • Color FamilySilver
  • Dry ColorSilver
  • Container1
  • Selling Unit1, Count
  • N52 grade neodymium for maximum holding force
  • 40 x 40 x 20 mm block covers large contact area
  • Magnetised through 20 mm thickness with poles on flat faces
  • Operates up to 80 °C / 176 °F without loss
  • Single industrial lifting magnet ready for heavy-duty use

DIYMAG F404020 Neodymium Magnet Block

The DIYMAG F404020 is a single neodymium-iron-boron block magnet measuring 40mm by 40mm by 20mm. It is magnetised through the thickness with poles on the flat surfaces. The N52 grade material suits science, engineering and industrial lifting tasks. It is supplied new and individually packaged.

Thermal and Handling Limits

Maximum operating temperature is 80°C or 176°F; exceeding this risks permanent loss of magnetism. The brittle NdFeB material can fracture or splinter on impact, so gloves and protective glasses are advised during handling. No power draw or noise is produced in normal use.

Safety Distance and Accessories

The manufacturer recommends keeping at least three feet of distance from large magnets to avoid unintended attraction. No adhesives, coatings or mounting hardware are included in the package. The bare silver block requires user-supplied fixtures for installation.

Highlights

  • N52 grade neodymium for maximum holding force
  • 40 x 40 x 20 mm block covers large contact area
  • Magnetised through 20 mm thickness with poles on flat faces
  • Operates up to 80 °C / 176 °F without loss
  • Single industrial lifting magnet ready for heavy-duty use

Specifications

BrandDIYMAG
SeriesF404020 DIYMAG
ModelF404020
TypeMaterial Handling; Pulling & Lifting Equipment; industrial-rare-earth-magnets
ColorSilver
Color FamilySilver
Dry ColorSilver
Container1
Selling Unit1, Count
NontoxicNo
Number of Items1
Subcategory Match52141500

Questions about this item

How do I mount the 40x40x20mm N52 block and which pole face should contact the workpiece?

The magnet is magnetised through the 20mm thickness, so the poles sit on the two 40x40mm faces. Place one large face flat against the ferromagnetic surface; the opposite face becomes the active holding side.

What long-term degradation should I expect from the neodymium material?

The NdFeB alloy loses flux permanently if heated above 80°C. At room temperature the decay is negligible, but the brittle coating can chip on impact, exposing the material to corrosion.

At what point does the holding force drop off during continuous duty?

Sustained temperatures approaching 80°C / 176°F cause irreversible demagnetisation, which is the first hard limit under heavy or prolonged use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.