DIVI
DIVI Satellite TV Tuner 30cm Cable Kit
Sleeved 18AWG power-cable kit with 24-pin ATX, 8-pin EPS, two 8-pin PCI-E and one 6-pin PCI-E, 30 cm long, rated 105 °C 600 V
- TypeSatellite Receiving
- UL1015 certified 18AWG wiring handles 105°C and 600V
- Three-layer construction with tinned copper, PVC insulation and braided sleeve
- ABS connectors resist aging, compression and high temperatures
- Compatible with 500W to 1600W power supplies from major brands
- Kit includes 24-pin ATX, EPS, PCI-E cables and four combs
Cable kit overview
This DIVI kit supplies a full set of sleeved power cables for a desktop build. It includes a 24-pin ATX cable, an 8-pin EPS cable, two 8-pin PCIe cables and a 6-pin PCIe cable, all cut to a 30-centimetre length. The wires use 18AWG tinned copper rated to 105 degrees Celsius and 600 volts.
Builder fit
The kit suits builders who want colour-matched extensions for a clean look inside a standard tower. It is not for users who need longer runs to reach a bottom-mounted power supply in a large chassis, nor for anyone whose PSU uses proprietary pin-outs that prevent standard ATX connectors from seating correctly.
Install notes
Each cable ends in a high-temperature ABS connector that clicks onto the motherboard, CPU and graphics card headers. The braided sleeving makes the cables stiffer than bare wire, so plan the bend radius before routing them behind the motherboard tray. Four combs per cable are included to keep the wires aligned once the final position is set.
Highlights
- UL1015 certified 18AWG wiring handles 105°C and 600V
- Three-layer construction with tinned copper, PVC insulation and braided sleeve
- ABS connectors resist aging, compression and high temperatures
- Compatible with 500W to 1600W power supplies from major brands
- Kit includes 24-pin ATX, EPS, PCI-E cables and four combs
Specifications
| Type | Satellite Receiving |
|---|
Questions about this item
What power-supply wattage range does this 18AWG cable kit support?
The kit is adapted for power supplies between 500 W and 1600 W, using UL1015 18AWG wire rated at 105 °C and 600 V.
Will the 24-pin ATX and 8(4+4)-pin EPS connectors fit an older motherboard that uses a 20-pin main plug and a 4-pin CPU plug?
Yes — the 24-pin connector splits to 20+4 pins and the 8(4+4)-pin EPS splits to two 4-pin halves, so both older headers are covered.
How can I confirm the cables are seated correctly after routing them?
Each connector uses an ABS male/female interface that clicks firmly into place; the included combs align the 30 cm runs so you can visually verify every pin is fully inserted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
