We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White carbon-fibre digital caliper with 1.9 inch LCD screen and 150 mm range

Digital Caliper 150 mm

SKU CH-P8XB-4SWX2

Digital caliper measures 0–150 mm with ±0.2 mm accuracy, 1.9-inch LCD, and four-mode carbon-fibre body

  • Measures up to 150 mm with ±0.2 mm accuracy
  • Jumbo 1.9 inch LCD boosts reading speed by 60%
  • Lightweight carbon-fibre body prevents hand fatigue during long sessions
  • Four-mode tool covers outer, inner, depth and step measurements
  • One-button mm/inch switching plus auto-off after 5 minutes idle

150 mm Digital Caliper

This 150 mm digital caliper is built for jewellers, hobbyists and workshop technicians who need quick, readable measurements on small parts. Its carbon-fibre reinforced plastic body keeps the tool light for extended use without hand fatigue. The extra-large 1.9 inch LCD delivers clear digits in dim or bright conditions. One-button switching between millimetres and inches speeds up everyday tasks.

Capacity and headroom

The measuring range spans 0 to 150 mm with a stated accuracy of ±0.2 mm and a resolution of 0.01 mm. Four measurement modes cover outside diameter, inside diameter, depth and step height on items such as rings, bearings, holes and machined steps. The tool runs out of range beyond 150 mm, so larger workpieces will require a longer instrument. Auto power-off after five minutes of inactivity preserves the battery during long sessions.

1.9 inch jumbo LCD

The oversized 1.9 inch display is the single specification that decides suitability; it increases reading speed by 60 per cent and reduces eye strain during eight-hour shifts. If your work demands a smaller, pocket-sized screen or a traditional vernier scale, this model will feel bulky. The large digits and high contrast make it the right part for users who prioritise fast, fatigue-free readability over maximum compactness.

Highlights

  • Measures up to 150 mm with ±0.2 mm accuracy
  • Jumbo 1.9 inch LCD boosts reading speed by 60%
  • Lightweight carbon-fibre body prevents hand fatigue during long sessions
  • Four-mode tool covers outer, inner, depth and step measurements
  • One-button mm/inch switching plus auto-off after 5 minutes idle

Specifications

No published specifications for this item yet.

Questions about this item

Will the 150 mm measuring range cover the same workpieces I now check with my old 6-inch vernier?

Yes, the 0–150 mm range matches a traditional 6-inch scale, so any part you measured before will fit within the same span.

How can I confirm the ±0.2 mm accuracy is holding after I unbox it?

Close the jaws completely, press the zero button, then measure a certified gauge block; the reading should stay within ±0.2 mm of the block’s nominal size.

Does the package include a battery for the 1.9 inch LCD or must I buy one separately?

The caliper ships ready to use with a pre-installed button cell; no separate battery purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.