We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminum M.2 NVMe SSD dock with USB-C cable, short tether, single slot, status LED

Digifast

Digifast M.2 NVMe SSD Docking Base USB 3.2 Gen 2 Type-C 10 Gbps Black

SKU CH-KBPT-GVPET

Tool-free M.2 NVMe dock with USB 3.2 Gen 2 Type-C reaching 997 MB/s read and 941 MB/s write, plus manual or automatic drive-select modes

  • ColorBlack
  • SizeM.2
  • TypeDock
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB 3.2
  • Switch drives without screws using the tool-free M.2 slot
  • Choose automatic or manual drive activation with a two-second button press
  • Reach 997 MB/s read and 941 MB/s write over USB 3.2 Gen 2
  • Aluminium heatsink and thermal pads keep the NVMe drive cool during use
  • Works immediately with no driver installation required

M.2 NVMe Dock with USB 3.2 Gen 2

This Digifast docking base lets you access a single M.2 NVMe M-Key SSD over a USB 3.2 Gen 2 Type-C link rated at 10 Gbps. The aluminium enclosure includes a heatsink and thermal pads to manage drive temperature during operation. It is built for users who move NVMe drives between systems and want a driver-free, plug-and-play connection.

Suits drive swappers; not for multi-bay

The two-mode switch — manual with a green LED and automatic with a blue LED — lets you bring a drive online instantly or keep it offline until you decide. That workflow helps technicians and creators who cycle through several SSDs in a session. Builders who need to mount more than one drive at once, or who want an internal M.2 slot instead of an external dock, should look elsewhere.

10 Gbps USB 3.2 Gen 2 Type-C interface

The connection caps sequential throughput at the bus limit, with supplier-measured reads up to 997 MB/s and writes up to 941 MB/s. If your host port or cable cannot deliver the full 10 Gbps lane, actual speeds will be lower. Confirm the host side supports USB 3.2 Gen 2 before purchase.

Highlights

  • Switch drives without screws using the tool-free M.2 slot
  • Choose automatic or manual drive activation with a two-second button press
  • Reach 997 MB/s read and 941 MB/s write over USB 3.2 Gen 2
  • Aluminium heatsink and thermal pads keep the NVMe drive cool during use
  • Works immediately with no driver installation required

Specifications

ColorBlack
SizeM.2
TypeDock
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB 3.2
HDD Count SupportedSingle SSD
Number of Bay1 Bay

Questions about this item

What comes in the box with the Digifast M.2 NVMe SSD Docking Base and do I need to buy anything else to use it?

The box includes the docking base with a built-in USB Type-C cable, an aluminum heatsink, and thermal pads for heat dissipation. You only need to supply your own M.2 NVMe M-Key SSD.

Which M.2 SSD versions or capacities are compatible with this single-bay dock?

The dock accepts a single M.2 NVMe M-Key drive in common lengths such as 2230, 2242, 2260, and 2280. There is no capacity limit imposed by the enclosure itself.

What do the quoted 997 MB/s read and 941 MB/s write speeds mean when the dock is connected to a real computer?

Those figures are the maximum sequential throughput over the USB 3.2 Gen 2 10 Gbps link. Actual speeds depend on the specific SSD installed, the host controller, file sizes, and thermal conditions.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.