Digi International
Digi International 76000926 Multiband Cellular Antenna 699-2690MHz
Multiband cellular antenna covering 699-960 MHz, 1710-2690 MHz and 2500-2690 MHz with 3 dBi gain and SMA connector for cellular network use
- Covers 699–960 MHz low-band cellular networks
- Extends to 1710–2690 MHz mid- and high-band frequencies
- 3 dBi isotropic gain improves signal reception
- SMA connector fits common cellular routers
- Compact 7.72" × 1.50" × .54" form factor weighs 1.41 oz
Multiband Cellular Antenna 699-2690 MHz
The Digi International 76000926 is a multiband cellular antenna covering 699-960 MHz, 1710-2690 MHz and 2500-2690 MHz ranges. It provides 3 dBi isotropic gain with an SMA connector for direct attachment. The compact black housing measures 7.72" height, 1.50" width and .54" depth, weighing 1.41 oz. It is designed for cellular network applications requiring broad frequency coverage.
Check SMA Port and Frequency Band
Verify that your router or modem has an SMA female port for the antenna connector. Confirm that your cellular carrier operates within the supported 699-960 MHz, 1710-2690 MHz or 2500-2690 MHz bands. The antenna is a passive component requiring no separate power source. Ensure the mounting location allows the 7.72" height clearance for proper installation.
Passive Operation Silent Zero Draw
As a passive antenna, it generates no heat and produces no audible noise during operation. It draws zero power from the connected device, adding no load to the router power supply. The unit relies entirely on signal reception across its specified frequency ranges. Performance depends on placement relative to the nearest cell tower and local obstructions.
Highlights
- Covers 699–960 MHz low-band cellular networks
- Extends to 1710–2690 MHz mid- and high-band frequencies
- 3 dBi isotropic gain improves signal reception
- SMA connector fits common cellular routers
- Compact 7.72" × 1.50" × .54" form factor weighs 1.41 oz
Specifications
| Brand | Digi International |
|---|
Questions about this item
What connectors and cables come with the 76000926 antenna and what must be purchased separately?
The antenna has an SMA connector. Cable and adapter requirements depend on the router or modem you are connecting to; check that device's port type.
Which frequency range of the 76000926 matches the bands used by my carrier?
The antenna covers 699–960 MHz, 1710–2690 MHz and 2500–2690 MHz. Compare these ranges with your carrier's licensed bands to confirm coverage.
What does the 3 dBi gain figure mean for real-world signal reception?
A 3 dBi isotropic gain provides modest omnidirectional improvement over a bare connector, helping maintain a usable cellular link in typical indoor or vehicle installations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
