Diamond Vantage
Diamond Vantage DXA0125P4525IH grinding disc 4-1/2 in grit 36 hard facing
A 4-1/2 inch diamond grinding disc with grit 36 for hard facing cast iron, ceramic, stainless steel and steel on angle grinders up to 13,600 RPM
- 4-1/2 in diameter fits standard angle grinders
- 36 grit removes material fast on steel and cast iron
- Type 1 wheel profile gives flat grinding surface
- BSL bond resists wear during hard-facing applications
- 13,600 RPM max speed matches high-speed grinder ratings
DiamondX Series Grinding Disc
The DiamondX series grinding disc is a 4-1/2 inch Type 1 wheel built for angle grinders with a 5/8-11 threaded spindle. It uses a diamond abrasive layer bonded with BSL technology for hard-facing applications on cast iron, ceramic, stainless steel and steel. Grit 36 provides aggressive material removal for professional metalworking tasks.
Thermal And Power Performance
The wheel is rated for a maximum operating speed of 13,600 RPM on compatible angle grinders. Diamond abrasive runs cooler than conventional bonded wheels during extended grinding passes on hard metals. The BSL bond resists glazing, maintaining cutting efficiency and reducing the power load on the tool motor during heavy stock removal.
Build Quality And Mounting
A 1/4 inch overall thickness adds rigidity for straight, controlled cuts and surface grinding on flat workpieces. The 5/8-11 threaded hole mounts directly to standard angle grinder spindles without adapters, minimising run-out. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Highlights
- 4-1/2 in diameter fits standard angle grinders
- 36 grit removes material fast on steel and cast iron
- Type 1 wheel profile gives flat grinding surface
- BSL bond resists wear during hard-facing applications
- 13,600 RPM max speed matches high-speed grinder ratings
Specifications
| Brand | DIAMOND VANTAGE |
|---|
Questions about this item
How do I mount the Diamond Vantage DXA0125P4525IH disc on my angle grinder, and what step do people often miss?
Thread the 5/8 in.-11 threaded hole onto the grinder spindle and tighten with the supplied wrench; the step many skip is fully seating the flange so the disc runs true at 13 600 RPM.
What part of this Diamond Vantage grinding disc will wear out first and need replacement?
The diamond abrasive layer bonded with BSL bond on the Type 1 wheel wears down during use; once the 36 grit surface is exhausted the disc must be replaced.
What limit appears first when I run this Diamond Vantage disc continuously on steel?
The 13 600 RPM maximum operating speed is the first hard limit; exceeding it risks wheel failure before heat or wear become issues.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
