DeVilbiss
DeVilbiss JGA-510-98FX HVLP Spray Gun Pressure Feed
HVLP spray gun with 1.1 mm nozzle, 11 cfm air consumption at 40 psi, and 11 in pattern for pressure-feed finishing
- ColorTransparent
- HVLP technology reduces overspray with 11 cfm air consumption at 40 psi
- 1 mm nozzle delivers medium-to-fast fluid flow for consistent coverage
- Pressure feed system suits very-low to medium viscosity coatings
- 11 in pattern width covers large surfaces in fewer passes
- 1/4 in air inlet connects to standard shop compressors
HVLP Pressure-Feed Spray Gun
The DeVilbiss JGA-510-98FX is an HVLP spray gun designed for pressure-feed operation. It suits professional painters and automotive refinishing shops that require consistent fluid delivery from a remote pressure pot. The gun handles very low to medium viscosity coatings effectively.
Build and Connection Details
The gun body features a transparent finish and includes a 1.1 mm fluid tip. It connects to an air supply via a standard 1/4 inch air inlet fitting. Air consumption is rated at 11 cfm at 40 psi, requiring a compressor capable of sustaining that flow during use.
Key Specification for Selection
The 1.1 mm nozzle size produces an 11 inch fan pattern and delivers fluid at a medium to fast speed. This combination determines the finish quality and material transfer rate. Verify that the nozzle diameter matches the coating viscosity and the desired application thickness before purchase.
Highlights
- HVLP technology reduces overspray with 11 cfm air consumption at 40 psi
- 1 mm nozzle delivers medium-to-fast fluid flow for consistent coverage
- Pressure feed system suits very-low to medium viscosity coatings
- 11 in pattern width covers large surfaces in fewer passes
- 1/4 in air inlet connects to standard shop compressors
Specifications
| Brand | DEVILBISS |
|---|---|
| Color | Transparent |
Questions about this item
What air pressure does the 1.1 mm nozzle need to deliver its rated 11 cfm?
The gun is rated at 11 cfm when supplied with 40 psi of air pressure.
What size air hose fitting does the gun accept?
The air inlet is a 1/4 in thread, so a standard 1/4 in quick-connect or hose barb fits directly.
How do you set up the pressure-feed connection so the gun sprays evenly?
Connect the fluid hose to the gun's fluid inlet, pressurise the remote cup or tank, then open the gun's fluid needle before pulling the trigger; skipping the needle-open step starves the tip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
