DeVilbiss
DeVilbiss FLG-HVS-322 HVLP Sprayer, Suction
HVLP spray gun with 2.2 mm nozzle, 13.5 cfm air consumption at 23 psi, 11 in pattern and 24 fl oz cup
- ColorTransparent
- HVLP technology reduces overspray with 13.5 cfm air consumption at 23 psi
- 2 mm nozzle produces an 11 in pattern for broad coverage
- Siphon-feed design enables medium-to-fast fluid delivery from the 24 fl oz cup
- Includes 24 oz disposable cup and adapter for immediate setup
- 1/4 in air inlet fits standard compressor connections
DeVilbiss FLG-HVS-322 HVLP Sprayer
The DeVilbiss FLG-HVS-322 is an HVLP spray gun designed for medium fluid delivery using a siphon feed system. It operates with an air consumption of 13.5 cfm at 23 psi and features a 2.2 mm nozzle that produces an 11 in pattern. The gun includes a 24 fl oz disposable cup and adapter for immediate use.
Upgrade from conventional spray guns
This model replaces standard high-pressure spray guns when reduced overspray and higher transfer efficiency are required. The HVLP design lowers air pressure at the nozzle while maintaining a medium-to-fast delivery speed. The jump is worth it for painters who need finer atomisation on medium-viscosity coatings without investing in a pressure-fed system.
Suited for siphon-cup workflows
The gun suits technicians and hobbyists who prefer a siphon cup setup for quick colour changes and easy cleaning. The 24 oz cup capacity supports moderate job sizes before refilling. Buyers who need larger cup volumes, pressure-fed delivery for continuous high-volume spraying, or a different nozzle size for specialised coatings should look at alternative configurations.
Highlights
- HVLP technology reduces overspray with 13.5 cfm air consumption at 23 psi
- 2 mm nozzle produces an 11 in pattern for broad coverage
- Siphon-feed design enables medium-to-fast fluid delivery from the 24 fl oz cup
- Includes 24 oz disposable cup and adapter for immediate setup
- 1/4 in air inlet fits standard compressor connections
Specifications
| Brand | DEVILBISS |
|---|---|
| Color | Transparent |
Questions about this item
What air compressor output does the DeVilbiss FLG-HVS-322 need to run at 23 psi?
The gun draws 13.5 cfm at 23 psi, so the compressor must supply at least that volume continuously.
Which fitting threads onto the 1/4 in air inlet during hookup?
Screw a 1/4 in NPT male connector into the inlet, then attach the air hose; skipping thread sealant causes leaks.
When should the 24 fl oz disposable cup be replaced?
Swap the cup when the liner tears, the lid seal fails, or dried coating blocks the siphon tube.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
