DeVilbiss
DeVilbiss EXL-620G-18 HVLP spray gun gravity 1 qt cup 1.8 mm tip
HVLP spray gun with gravity-feed cup delivers 16 cfm at 30 psi through a 1.8 mm tip for a 12 in pattern
- ColorTransparent
- HVLP design cuts overspray with 16 cfm at 30 psi
- 8 mm tip handles medium-viscosity coatings smoothly
- Gravity feed uses 1 qt cup for steady flow
- 12 in pattern covers panels quickly
- Includes 1 L aluminium cup ready to spray
HVLP Spray Gun for Gravity Feed
The DeVilbiss EXL-620G-18 is an HVLP spray gun designed for gravity-fed fluid delivery. It operates at very low to medium fluid delivery speeds and features a 1.8 mm nozzle size. The gun is built for professional finishing applications where controlled atomisation is required.
Includes 1 L Aluminium Gravity Cup
The gun comes supplied with a 1 L aluminium gravity cup that attaches directly to the body. This cup provides a 1 qt capacity for coating material. The gravity feed design allows the fluid to flow into the nozzle without requiring a pressurised pot, simplifying setup and cleaning for smaller jobs.
Suited for Medium Viscosity Coatings
This model suits painters applying medium viscosity materials with a 12 in pattern width at 16 cfm and 30 psi. It is not intended for high-volume production lines needing larger fluid passages or pressure-fed systems. Users requiring different atomisation characteristics should select a tip size matched to their specific coating.
Highlights
- HVLP design cuts overspray with 16 cfm at 30 psi
- 8 mm tip handles medium-viscosity coatings smoothly
- Gravity feed uses 1 qt cup for steady flow
- 12 in pattern covers panels quickly
- Includes 1 L aluminium cup ready to spray
Specifications
| Brand | DEVILBISS |
|---|---|
| Color | Transparent |
Questions about this item
How often will the 1.8 mm fluid tip need replacement with daily use?
The 1.8 mm stainless steel fluid tip resists wear from abrasive coatings; replace it when the spray pattern becomes uneven or fluid delivery drops noticeably.
What limits continuous spraying at the 16 cfm air consumption rate?
The compressor must supply 16 cfm at 30 psi without pressure drop; if the pump cannot keep up, the gun will sputter and the pattern will narrow.
How much heat does the gun body generate during an all-day job?
The aluminium gun body stays near ambient temperature because expanding air cools the fluid path; only the compressor and hose warm up significantly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
