We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber acrylic adhesive in a syringe bottle

DEVCON

DEVCON 14300 Acrylic Adhesive Amber Bottle 24

SKU CH-8R0Z-1RVEZ

Amber acrylic adhesive bonds ABS, acrylic, metal, plastic and polycarbonate with a 1:1 mix ratio, 3-minute working time and water-resistant cure

  • ColorAmber
  • Acrylic formula bonds ABS, acrylic, metal, plastic and polycarbonate
  • Moisture-cure chemistry delivers a water-resistant joint
  • 3-minute working time allows quick repositioning
  • Low-odour, VOC-compliant resin and hardener included
  • 150 sq in coverage per 25 mL syringe

DEVCON 14300 Acrylic Adhesive

This two-part acrylic adhesive bonds ABS, acrylic, metal, plastic and polycarbonate. It suits assembly, repair and maintenance tasks where a structural bond is required. The 1:1 mix ratio simplifies preparation for technicians and hobbyists alike. Marine-grade formulation allows interior and exterior use.

Thermals noise and power

Working time is 3 minutes before the adhesive begins to set. Cure occurs through moisture activation without external heat or pressure. Low odour and VOC content below 50 g/L reduce fumes during application. No powered equipment is needed for dispensing or curing.

Syringe and mixing stick

The syringe container delivers 25 mL covering approximately 150 square inches per unit. Resin and hardener are included alongside a mixing stick for immediate use. Cured colour is cream and the bond remains water-resistant. Chemical resistance extends service life in harsh environments.

Highlights

  • Acrylic formula bonds ABS, acrylic, metal, plastic and polycarbonate
  • Moisture-cure chemistry delivers a water-resistant joint
  • 3-minute working time allows quick repositioning
  • Low-odour, VOC-compliant resin and hardener included
  • 150 sq in coverage per 25 mL syringe

Specifications

BrandDEVCON
ColorAmber

Questions about this item

How do I apply the 1:01 mix ratio resin and hardener without wasting the 3-minute working time?

Dispense equal parts from the syringe, mix thoroughly with the included stick, and apply immediately — the adhesive begins to cure in three minutes.

Will the cured amber bond stay water-resistant and chemical-resistant outdoors?

Yes, the cured cream-coloured adhesive is rated for interior and exterior use, is marine-grade, water-resistant, and chemically resistant.

What coverage can I expect from one 25 mL syringe before I need another?

Each 25 mL syringe covers approximately 150 square inches of bonded surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.