We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray epoxy adhesive in a 25 mL syringe applicator

DEVCON

DEVCON 14240 Epoxy Adhesive Applicator, Gray, Syringe, 25 mL

SKU CH-4FAE-RKZQX

Two-part epoxy adhesive in a 25 mL syringe bonds ceramic, concrete, metal, plastic and wood with a four-minute working time and moisture cure

  • TypeSealing Compound
  • 4-minute working time speeds repairs
  • 1:1 mix ratio simplifies preparation
  • 12-hour cure delivers strong bonds
  • 150 sq in coverage per 25 mL syringe
  • Solvent-resistant formula suits interior and exterior use

DEVCON 14240 Epoxy Adhesive Applicator

This two-part epoxy adhesive comes in a 25 mL syringe for precise dispensing. It bonds ceramic, concrete, metal, plastic and wood in interior and exterior applications. The 1:1 mix ratio simplifies preparation and the package includes resin, hardener and a mixing stick.

Suitable for repairs needing solvent-resistant.

Users who require a marine-grade adhesive should look elsewhere. The 4-minute working time suits quick assembly but not large or complex layouts. Zero VOC content and low odour make it appropriate for enclosed spaces.

Cures by moisture to a gray finish in 12 hours

Full strength develops after the stated cure period rather than during the initial set. Maximum application temperature is 90 °F. Coverage reaches approximately 150 sq in per 25 mL syringe.

Highlights

  • 4-minute working time speeds repairs
  • 1:1 mix ratio simplifies preparation
  • 12-hour cure delivers strong bonds
  • 150 sq in coverage per 25 mL syringe
  • Solvent-resistant formula suits interior and exterior use

Specifications

TypeSealing Compound
BrandDEVCON

Questions about this item

Does this epoxy syringe include both the resin and hardener needed to start bonding?

Yes, the 25 mL syringe contains both resin and hardener in a 1:01 mix ratio so no separate purchase is required.

Can I apply this adhesive over a previously cured epoxy joint without sanding?

The gray adhesive bonds to ceramic, concrete, metal, plastic and wood, but the cured surface should be clean and lightly abraded for best adhesion.

How can I confirm the bond is fully cured after the 12 hour period?

After 12 hours the joint will be gray, hard, solvent resistant and water-resistant, indicating full cure at room temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.