DEVCON
DEVCON 11350 Epoxy Adhesive Gray Pail 2:1 Mix Ratio
Two-part epoxy adhesive in a pail bonds metal with 15-minute working time and abrasion-resistant, chemical-resistant gray finish
- TypeCaulks
- Fast-curing bond ready in 15 minutes
- Abrasion and chemical resistant for durable repairs
- Impact resistant with superior wear protection
- Low odor, water-resistant formula for interior and exterior use
- Marine grade epoxy bonds metal with under 20 g/L VOC
Industrial-Grade Epoxy for Metal Bonding
DEVCON 11350 is a two-part epoxy adhesive formulated for structural bonding of metal surfaces. The gray adhesive comes in a pail containing both resin and hardener components mixed at a 2:1 ratio. It is designed for interior and exterior applications where abrasion resistance, chemical resistance, and impact strength are required. Marine-grade certification and low odor make it suitable for demanding environments.
Fast-Curing Formula With Low VOC Profile
The adhesive offers a working time of 15 minutes before cure begins, allowing adequate positioning of parts. VOC content is less than 20 g/L by weight and zero percent by percentage, meeting strict environmental standards. Coverage reaches 53 sq in per pound of mixed material. Water-resistant properties and superior wear resistance ensure durability in normal service conditions without excessive fumes.
Sustained Load Performance in Harsh Conditions
Under continuous stress, the cured epoxy maintains structural integrity through superior wear and abrasion resistance. Chemical resistance protects bonds from degradation when exposed to solvents or fluids over time. Impact resistance prevents failure from vibration or sudden loads. The adhesive is not suited for buyers needing flexible bonds, gap-filling beyond thin joints, or non-metal substrates without testing.
Highlights
- Fast-curing bond ready in 15 minutes
- Abrasion and chemical resistant for durable repairs
- Impact resistant with superior wear protection
- Low odor, water-resistant formula for interior and exterior use
- Marine grade epoxy bonds metal with under 20 g/L VOC
Specifications
| Type | Caulks |
|---|---|
| Brand | DEVCON |
Questions about this item
How do I mix the resin and hardener in the correct 2:1 ratio and what step is often missed?
Measure two parts resin to one part hardener by volume, then stir thoroughly for the full 15 minute working time; the step most often missed is scraping the container sides and bottom to incorporate all material.
Will the cured adhesive need recoating or replacement in high-wear areas?
The cured gray epoxy is abrasion resistant, impact resistant and chemical resistant, so it typically does not require recoating or replacement under normal service conditions.
At what point does the 15 minute working time limit application on large projects?
You have 15 minutes after mixing before the epoxy begins to set, so only mix the quantity you can apply and tool within that window.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
