We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray epoxy adhesive in a metal pail

DEVCON

DEVCON 10720 Epoxy Adhesive Gray Pail 16 hr

SKU CH-RRZM-AJ154

Two-part gray epoxy adhesive in a pail, self-leveling, machinable and water-resistant with a 75-minute working time and 16-hour cure

  • ColorGray
  • 16-hour cure gives time for precise alignment
  • 75-minute working window allows complex assemblies
  • Low viscosity and self-leveling liquid fill gaps evenly
  • Machinable cured epoxy enables post-cure finishing
  • Zero VOC content suits indoor and outdoor use

What the product is

DEVCON 10720 is a two-part epoxy adhesive supplied in a pail. The gray resin and hardener mix at a 5:01 ratio and cure in sixteen hours. Low viscosity and self-leveling liquid make it suitable for casting, bonding metal, and general interior or exterior repairs where low shrinkage and machinability are required.

What to check before ordering

Confirm that the surfaces to be bonded are metal or another compatible substrate. The working time is seventy-five minutes at room temperature, so plan the application sequence accordingly. Maximum application temperature is ninety degrees Fahrenheit, and the product is restricted from sale in certain states; verify local regulations before purchase.

What the bundled components change

The pail includes both resin and hardener, removing the need to source separate containers. Zero VOC content and low odor improve workplace comfort during mixing and cure. Marine-grade water resistance extends the useful life of bonded assemblies exposed to moisture, while the cured gray finish can be machined or painted after the sixteen-hour cure.

Highlights

  • 16-hour cure gives time for precise alignment
  • 75-minute working window allows complex assemblies
  • Low viscosity and self-leveling liquid fill gaps evenly
  • Machinable cured epoxy enables post-cure finishing
  • Zero VOC content suits indoor and outdoor use

Specifications

BrandDEVCON
ColorGray

Questions about this item

Does the pail contain both resin and hardener, or do I need to buy the hardener separately?

The pail includes both resin and hardener as the two components needed for the 5:01 mix ratio.

How do I decide which container size to choose when only the 10720 pail is listed?

The 10720 model is supplied in a single pail format; choose it when you need a bulk quantity for larger projects.

What does the 16 hour cure time mean for a repair that must bear load?

The adhesive reaches full cure in 16 hours at room temperature; the bonded joint should not be stressed before that period ends.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.