Deltana Enterprises
Deltana Enterprises BDS450U5 4-1/2" Baseboard Door Bumper Antique Brass
Solid brass baseboard door bumper with 4-1/2 inch extension and interchangeable rubber tips
- FinishAntique Brass
- Solid brass construction resists corrosion and wear
- 4-1/2 inch maximum extension protects walls from impact
- Includes three base sizes for flexible installation
- Supplied with two-inch screws for secure mounting
- Grey and white rubber tips prevent surface damage
Solid Brass Baseboard Door Bumper
This solid brass baseboard door bumper protects walls from door handle impact. The antique brass finish suits period and traditional interiors. It is designed for residential and light commercial doors where a durable, low-profile stop is required.
Replaces Shorter or Plastic Stops
The 4-1/2 inch maximum extension reaches past deep baseboards that shorter bumpers cannot clear. Upgrade when existing stops leave marks or fail to contact the door before the handle hits the wall. The included 3 inch, 1 inch and 1/2 inch base pieces allow precise projection matching.
Fixed Projection Limit
The bumper extends to 4-1/2 inches and cannot be adjusted beyond that range. Very thick baseboards or unusually deep trim may exceed the available projection. Solid brass construction resists corrosion but the rubber tips will wear with heavy use and require replacement.
Highlights
- Solid brass construction resists corrosion and wear
- 4-1/2 inch maximum extension protects walls from impact
- Includes three base sizes for flexible installation
- Supplied with two-inch screws for secure mounting
- Grey and white rubber tips prevent surface damage
Specifications
| Finish | Antique Brass |
|---|---|
| Brand | Deltana |
| Model | BDS450U5 |
Questions about this item
How much wall clearance does the 4-1/2" maximum extension require for installation?
The bumper projects 4-1/2 inches from the baseboard, so allow at least that much clear space behind the door swing to prevent contact with the wall.
Which screw length should I use when mounting the base to a standard baseboard?
Use the included 2-inch screws; they are sized to penetrate the 3-inch, 1-inch, or 1/2-inch base options and secure firmly into the wall framing.
When should I replace the gray or white rubber tip on this solid brass bumper?
Replace the tip when the rubber shows cracking, hardening, or no longer cushions the door impact, typically after several years of normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



