We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELTA

DELTA EFB0612MA 60mm 12V 3600 RPM Ball Bearing 3-Pin Fan

SKU CH-V8FG-2719N

A 60 mm 12 V ball-bearing fan with a tachometer signal, running at 3600 RPM and moving 15.5 CFM at 29 dBA

  • TypeCooling Fan
  • Bearing TypeBall
  • RPM1 x 3600 rpm
  • Air Flow1 x 15.5 CFM
  • Cools efficiently with 15.5 CFM airflow at 3600 RPM
  • Ball bearing design extends operational lifespan
  • 3-pin tachometer connector enables speed monitoring
  • Low 29 dBA noise suits quiet environments
  • Operates on 12 V DC across 7.0–13.8 V range

Compact 60 mm Ball-Bearing Fan

The Delta EFB0612MA is a 60 x 60 x 10 mm axial fan designed for tight chassis or workstation bays where a low-profile 12 V cooler is required. It draws 0.08 A typical and spins at 3600 RPM to deliver 15.5 CFM of airflow. The three-wire lead includes a tachometer signal for speed monitoring. It is sold as a single unit.

Steady-State Thermal Behaviour

At the rated 12 V the motor runs continuously at 3600 RPM with a maximum current draw of 0.12 A and 1.44 W input power. The ball bearing maintains consistent speed and 29 dBA acoustic output over long duty cycles without the wear-in period seen in sleeve designs. Operating voltage range extends from 7.0 V to 13.8 V, allowing speed scaling while preserving bearing stability.

Straightforward 3-Pin Installation

The 24-inch lead terminates in a standard three-pin connector that fits most motherboard or controller headers without adapters. Polarity follows the conventional yellow-black-red arrangement; reversing it will prevent the tachometer from reporting speed. The 60 mm frame uses industry-standard mounting holes, so no proprietary brackets are needed. Ensure the header can supply at least 0.12 A peak current.

Highlights

  • Cools efficiently with 15.5 CFM airflow at 3600 RPM
  • Ball bearing design extends operational lifespan
  • 3-pin tachometer connector enables speed monitoring
  • Low 29 dBA noise suits quiet environments
  • Operates on 12 V DC across 7.0–13.8 V range

Specifications

BrandDelta
TypeCooling Fan
Bearing TypeBall
RPM1 x 3600 rpm
Air Flow1 x 15.5 CFM

Questions about this item

How loud and how much power does the 3600 RPM ball-bearing fan draw when it runs continuously?

The fan produces 29 dBA of noise and consumes 0.96 W typical, up to 1.44 W maximum at 12 V.

What connector and voltage range does the 60 mm fan require from the motherboard or controller?

It uses a 3-pin 24-inch lead and operates from DC 7.0 V to 13.8 V, drawing 0.08 A typical.

Will the 60x60x10 mm 3-pin fan fit the mounting holes and header on an HP XW3100 workstation I still use?

Yes, the supplier lists the HP XW3100 as a compatible system for this 60 mm 3-pin model.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.