DELL
DELL XL710 40Gbps Dual Port QSFP Converged Network Adapter
A converged network adapter providing dual-port 40Gbps connectivity over PCI Express 3.0 x8 with QSFP interfaces
- Speed40Gbps
- InterfacePCI-Express
- Temperature0°C ~ 55°C
- 40 Gbps throughput for high-bandwidth server workloads
- Dual QSFP ports enable flexible LAN and SAN connectivity
- PCI Express 3.0 x8 interface delivers low-latency data transfer
- Converged adapter consolidates networking and storage traffic
- Operates reliably from 0 °C to 55 °C
Dell XL710 40Gbps Converged Adapter
This Dell XL710 converged network adapter delivers 40Gbps connectivity through a PCI-Express 3.0 x8 interface. It features dual QSFP ports for high-speed LAN and SAN traffic in virtualised data-centre environments. The card operates reliably from 0°C to 55°C.
Suited for virtualised server and storage fabrics
This adapter suits administrators building high-throughput server clusters or consolidating LAN and SAN traffic onto a single converged fabric. It is not for workstations lacking a PCI-Express 3.0 x8 slot or for networks that require lower-speed copper interfaces.
PCI-Express 3.0 x8 host interface
The card requires a PCI-Express 3.0 x8 slot to achieve its rated 40Gbps throughput per port. Verify the motherboard or riser provides this exact link width and generation before purchase.
Highlights
- 40 Gbps throughput for high-bandwidth server workloads
- Dual QSFP ports enable flexible LAN and SAN connectivity
- PCI Express 3.0 x8 interface delivers low-latency data transfer
- Converged adapter consolidates networking and storage traffic
- Operates reliably from 0 °C to 55 °C
Specifications
| Brand | Dell |
|---|---|
| Part Number | VFHX9 |
| Speed | 40Gbps |
| Interface | PCI-Express |
| Temperature | 0°C ~ 55°C |
Questions about this item
Does my server need a PCI-Express 3.0 x8 slot to install the XL710 adapter?
Yes, the adapter requires a PCI-Express 3.0 x8 slot for installation and operation.
Will the dual QSFP ports on this adapter connect to my existing 10GbE SFP+ switches?
The ports accept QSFP transceivers; direct SFP+ modules are not compatible without a QSFP-to-SFP+ adapter module.
How can I verify the card is running at 40Gbps after installation?
Check the negotiated link speed in your operating system network settings or switch management interface to confirm 40Gbps operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



