We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell CPU heatsink with 70 mm fan, aluminum fins and copper base, 4.7 by 4.7 by 1.6 inches

DELL

DELL TY0P5 CPU Heatsink Assembly Optiplex 9010A Inspiron One 2330

SKU CH-9N97-PFVQC

Replacement CPU heatsink with integrated 70mm PWM fan for Dell Optiplex 9010A and Inspiron One 2330, featuring copper core and pre-applied thermal paste

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell Optiplex 9010A, Inspiron One 2330
  • Dimensions4.7" x 4.7" x 1.6" (L x W x H)
  • Weight0.55 lbs
  • Keeps your CPU cool with integrated 70mm PWM fan
  • Fits Optiplex 9010A and Inspiron One 2330 exactly
  • Pre-applied thermal paste saves installation time
  • Copper core and aluminium fins move heat efficiently
  • Lightweight 0.55 lb design adds minimal bulk

Genuine Dell CPU Heatsink Assembly TY0P5

This Dell heatsink assembly is an OEM replacement built for the Optiplex 9010A and Inspiron One 2330 desktops. It restores factory cooling performance for owners of those specific systems. The unit fits only the listed Dell models and is not compatible with other chassis or motherboard layouts. Buyers needing a cooler for a different platform should look elsewhere.

Aluminium fin stack with copper core

The cooler uses an aluminium fin stack bonded to a copper core base to draw heat away from the processor. A 70 mm PWM fan adjusts speed automatically based on thermal load, keeping noise low during light work and ramping up when the CPU is stressed. Pre-applied thermal paste removes the need for a separate tube and helps ensure even coverage on installation. The assembly weighs .55 lbs and measures 4.7 by 4.7 by 1.6 inches.

Verify exact model number

Confirm the service tag or chassis label matches Optiplex 9010A or Inspiron One 2330, as Dell uses different mounting patterns across similar-looking all-in-one units. Check that the 4.7 inch square footprint and 1.6 inch height clear surrounding components inside the case. Ensure the motherboard provides a standard PWM fan header for the integrated fan. Systems requiring a different bracket, screw spacing or fan connector will not accept this assembly.

Highlights

  • Keeps your CPU cool with integrated 70mm PWM fan
  • Fits Optiplex 9010A and Inspiron One 2330 exactly
  • Pre-applied thermal paste saves installation time
  • Copper core and aluminium fins move heat efficiently
  • Lightweight 0.55 lb design adds minimal bulk

Specifications

BrandDell
Part NumberTY0P5
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell Optiplex 9010A, Inspiron One 2330
Dimensions4.7" x 4.7" x 1.6" (L x W x H)
Weight0.55 lbs

Questions about this item

What fan diameter does the TY0P5 heatsink use?

The TY0P5 assembly includes an integrated 70 mm PWM fan that adjusts speed based on CPU load.

Will the TY0P5 fit inside my Optiplex 9010A chassis?

The heatsink measures 4.7 by 4.7 by 1.6 inches and weighs .55 lbs, matching the original Optiplex 9010A and Inspiron One 2330 mounting points.

Do I need to apply my own thermal compound when installing the TY0P5?

Thermal paste is pre-applied to the copper core base, so you only need to remove the protective film and secure the four mounting screws.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.