We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR3L DIMM module with 240 gold pins and black memory chips

DELL

DELL SNPTJ1DYC/8G 8GB DDR3L-1333 ECC Registered DIMM

SKU CH-GCG4-GFPNN

8 GB DDR3L ECC registered DIMM running at 1333 MHz with 1.35 V and 240 pins

  • TypeIndex Cards & Files
  • ECC protection catches memory errors for data integrity
  • Registered signal processing stabilises heavy server workloads
  • Low 1.35 V DDR3L voltage reduces power draw
  • 1333 MHz DDR3L-1333 speed matches system bus
  • 240-pin DIMM fits standard registered memory slots

Dell SNPTJ1DYC/8G 8GB DDR3L-1333 ECC Registered DIMM

This 8GB DDR3L memory module operates at 1.35 V and runs at 1333 MHz. It uses a 240-pin DIMM form factor with ECC error checking and registered signal processing for data integrity. The single module conforms to the PC3-10600 standard.

Suitable for DDR3L servers needing registered ECC

This module fits systems that require 1.35 V DDR3L registered DIMMs with ECC support. It is not for platforms limited to unbuffered non-ECC memory. It is also not for builds needing speeds above 1333 MHz or voltage levels of 1.5 V.

1.35 V DDR3L voltage and registered ECC design

The 1.35 V operating voltage identifies this as a DDR3L part compatible with low-voltage server sockets. Registered signal processing and ECC error checking are mandatory for the target platform. Verify the motherboard supports registered DDR3L DIMMs before purchase.

Highlights

  • ECC protection catches memory errors for data integrity
  • Registered signal processing stabilises heavy server workloads
  • Low 1.35 V DDR3L voltage reduces power draw
  • 1333 MHz DDR3L-1333 speed matches system bus
  • 240-pin DIMM fits standard registered memory slots

Specifications

TypeIndex Cards & Files
BrandDell

Questions about this item

Do I need a motherboard that supports 1.35 V DDR3L memory to use this module?

Yes, the module runs at 1.35 V and requires a DDR3L-compatible slot; a standard 1.5 V DDR3-only board may not recognise it correctly.

Will this 1333 MHz registered DIMM work in a system that currently uses unbuffered DDR3 at 1333 MHz?

No, registered and unbuffered modules cannot be mixed; the motherboard must support registered DIMMs and the existing unbuffered sticks would need to be removed.

How can I confirm the module is running at the rated 1333 MHz with ECC active after installation?

Check the memory speed and ECC status in the BIOS/UEFI or use a tool such as CPU-Z; both should show 1333 MHz (PC3-10600) and ECC enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.