DELL
DELL Precision 7530 7540 DGFF Power Cable MX2D7
Genuine Dell OEM DGFF power cable supplies the Nvidia Quadro T1000 graphics card in Precision 7530 and 7540 workstations
- Genuine Dell OEM part ensures reliable DGFF graphics power
- Powers DGFF daughter card in Precision 7530 and 7540 workstations
- Required for Precision 7540 with Nvidia Quadro T1000 GPU
- Dell part number MX2D7 matches service documentation exactly
- Cable-only design replaces damaged or missing power lead
Genuine Dell DGFF Power Cable MX2D7
This genuine Dell OEM cable delivers power to the DGFF daughter graphics card inside Precision 7530 and 7540 mobile workstations. It carries Dell part number MX2D7 and matches the on-cable identifiers DAP10_DGFF_CABLE and DC02002ZN00. The part is supplied new and is intended for repair or upgrade work on the listed Precision models.
Passive cable with no active cooling
The cable is a passive wire assembly that draws no power of its own and generates no heat or noise during operation. It simply conducts the required current from the system board to the DGFF graphics module. No fan, radiator or thermal interface is present, so acoustics and thermals are determined entirely by the host laptop.
Not for Precision 7540 configurations
The Precision 7540 uses different power cables depending on which GPU is installed; this specific cable is only validated for systems equipped with the Nvidia Quadro T1000. Buyers whose 7540 contains a different graphics card will need the alternative cable part number for that configuration.
Highlights
- Genuine Dell OEM part ensures reliable DGFF graphics power
- Powers DGFF daughter card in Precision 7530 and 7540 workstations
- Required for Precision 7540 with Nvidia Quadro T1000 GPU
- Dell part number MX2D7 matches service documentation exactly
- Cable-only design replaces damaged or missing power lead
Specifications
| Brand | Dell |
|---|
Questions about this item
How do I install the DGFF power cable on my Precision 7530 and what step is commonly missed?
Route the cable from the motherboard connector to the DGFF graphics daughter card, then press the MX2D7 plug firmly until it clicks; the step often missed is verifying the latch is fully seated on both ends.
What maintenance or replacement will this DGFF power cable need over time?
The cable itself requires no scheduled maintenance; replace it only if the insulation shows wear, the connector pins bend, or the MX2D7 plug no longer locks securely to the daughter card.
What is the first limit that appears when the Precision 7540 with Quadro T1000 runs sustained loads?
The DGFF power cable MX2D7 is rated for the T1000's normal draw; the first limit under sustained use is typically the laptop's thermal throttling, not the cable's current capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



