We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PowerEdge R905 SAS cable, 32.5 inch x4 SFF-8484 KT294

DELL

DELL PowerEdge R905 SAS 32.5 Inch x4 SFF-8484 Perc Cable KT294

SKU CH-13R5-D8ZZC

Connects the PERC controller to the backplane in a PowerEdge R905 server using a 32.5 inch SAS cable with SFF-8484 connectors

  • Genuine Dell SAS cable built for PowerEdge R905 servers
  • 5 inch length fits the R905 chassis layout
  • x4 SFF-8484 connectors link PERC controller to backplane
  • Part KT294 matches the original Dell specification

Genuine Dell SAS cable for PowerEdge R905 servers

This genuine Dell original SAS cable connects a PERC controller to the backplane in PowerEdge R905 server systems. The 32.5 inch length with x4 SFF-8484 connectors ensures proper internal routing and signal integrity. Designed specifically for the R905 platform, it carries Dell part number KT294 for exact replacement matching. It is a new component sourced directly from the original equipment manufacturer.

Internal storage connectivity for supported Dell

The cable provides the physical link between the RAID controller and drive backplane, enabling SAS drive communication within the chassis. Without this specific harness, the storage subsystem cannot function in the target server model. It addresses the need for a factory-correct replacement when the original cable is damaged or missing during maintenance. Builders working on non-R905 platforms or requiring different connector types or lengths will need an alternative part.

Highlights

  • Genuine Dell SAS cable built for PowerEdge R905 servers
  • 5 inch length fits the R905 chassis layout
  • x4 SFF-8484 connectors link PERC controller to backplane
  • Part KT294 matches the original Dell specification

Specifications

BrandDell

Questions about this item

How often should the SAS cable in the PowerEdge R905 be inspected for wear?

Check the KT294 cable during routine server maintenance or whenever the chassis is opened; replace it if the SFF-8484 connectors show bent pins or the jacket has cracks.

What is the maximum cable length that still guarantees reliable SAS signal integrity?

The KT294 is manufactured at 32.5 inches, which is the validated length for the PowerEdge R905 backplane connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.