DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2699 v3 2.3GHz 18-core 768GB DDR4 24x 800GB SSD
- Rack
- 2U
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
DELL
2U rack server with dual Xeon E5-2640 v3 processors, 768GB DDR4 ECC memory, 24 SATA SSDs and a PERC H730 RAID controller
The PowerEdge R730xd is a 2U rack server built around two Intel Xeon E5-2640 v3 processors running at 2.6 GHz with eight cores each. It ships with 768 GB of DDR4 registered ECC memory across 24 slots and a PERC H730 controller managing 24 installed 800 GB SATA SSDs. Dual 750 W power supplies, iDRAC8 Enterprise and quad-port 1GbE/10GbE networking come standard.
This configuration targets midsize and large enterprises running data warehouses, e-commerce platforms, VDI or HPC data nodes that benefit from 24 front-accessible 2.5-inch bays. Buyers who require fewer drive bays, a single-socket design or a smaller form factor should evaluate other platforms.
The storage controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode, backed by a battery. Its 12 Gb/s SAS/SATA interface and 1 GB cache determine the achievable redundancy and performance for the 24 installed SSDs.
| Brand | DELL |
|---|---|
| Series | PowerEdge R730XD |
| Model | R730xd |
| Type | Rack |
| Rack Height | 2U |
| Redundant Hot-swap Power | Yes |
| CPU Type | Intel Xeon |
| CPU Speed | 2.60 GHz |
| CPU Socket | LGA 2011-3 |
| Number of CPU Cores | 8-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Chipset | Intel C610 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Number of Memory Slots | 24 |
| Storage Controller | Dell Perc H730 1GB Controller |
| HDD Interface | SATA |
| SSD (Installed) | 24 x 800GB SATA SSD |
| Raid Level | RAID 0/1/5/6/10/50/60 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card |
| LAN Ports | 4 x Ports |
| Expansion Slots | 1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3) |
| Management Port | RJ 45 |
| Operating System | No |
| Features | 24 x 2.5" SATA/SAS Hot-Plug Drive Bays |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 24 installed 800GB SSDs connect over SATA 6Gb/s through the PERC H730 controller, so each drive is limited to the SATA 6Gb/s interface ceiling.
The server occupies 2U of rack height and ships with ready rails and a front bezel for standard cabinet installation.
The PERC H730 mini controller is pre-installed in its dedicated slot; the step often missed is ensuring the battery backup module is seated so write-back caching can be enabled.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?