DELL
DELL PowerEdge R310 350W Power Supply R109K
350 W internal power supply for Dell PowerEdge R310 servers, 100-240 V input at 5.2 A, non-redundant design
- ColorSilver
- 350 W output powers Dell PowerEdge R310 servers
- 100–240 V input works worldwide without adapters
- Internal form factor fits directly into the R310 chassis
- Non-redundant design simplifies single-supply configurations
- OEM part R109K ensures exact Dell compatibility
Dell PowerEdge R310 350W Internal Supply
This 350 watt switching power supply is built for the Dell PowerEdge R310 server. It replaces the original D350E-S0 unit when the factory supply fails or a spare is needed. The part carries Dell part numbers R109K and 0R109K for exact identification.
Non-redundant silver chassis fits the R310 bay
The silver internal chassis slides into the standard R310 power-supply bay without adapters. As a non-redundant design it occupies the single supply slot, so the server runs on this unit alone. The form factor matches the OEM mounting points and connector layout exactly.
100-240 V input with 5.2 A draw at full load
The supply accepts 100 to 240 volt AC input worldwide and draws up to 5.2 amps when delivering full rated power. In normal server operation the switching topology regulates output efficiently, keeping heat and fan noise at levels consistent with the original Dell specification.
Highlights
- 350 W output powers Dell PowerEdge R310 servers
- 100–240 V input works worldwide without adapters
- Internal form factor fits directly into the R310 chassis
- Non-redundant design simplifies single-supply configurations
- OEM part R109K ensures exact Dell compatibility
Specifications
| Brand | Dell |
|---|---|
| Model | PowerEdge R310 |
| Part Number | R109K |
| Color | Silver |
Questions about this item
What input voltage range does the 350 W power supply accept?
The unit operates on 100-240 V AC at up to 5.2 A, covering worldwide mains without a switch.
What chassis and form factor is the supply designed for?
It is an internal non-redundant module built for the Dell PowerEdge R310 server chassis.
How is the power supply installed in the R310?
Slide the unit into the server's dedicated power-supply bay until the latch clicks; the common mistake is not fully seating the connector before tightening the retention screw.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



