DELL
DELL PERC H810 SAS RAID Controller 6Gb/s PCIe 2.0 1GB NV Y8W2Y
A SAS RAID controller with 1 GB non-volatile cache and PCIe 2.0 interface
- 6 Gb/s SAS throughput accelerates storage arrays
- PCIe 2.0 host interface fits legacy servers
- 1 GB non-volatile cache protects write data
- PERC H810 firmware simplifies RAID management
Dell PERC H810 6Gb/s SAS RAID controller
The Dell PERC H810 is a 6Gb/s SAS RAID controller that plugs into a PCIe 2.0 slot. It ships new with 1GB of non-volatile cache and carries Dell part number Y8W2Y. The card targets servers that need hardware RAID for internal SAS drives.
PCIe 2.0 interface
This card uses a PCIe 2.0 connection, so it fits servers with that generation of slot. Buyers whose systems only offer PCIe 3.0 or newer slots should verify backwards compatibility before ordering. Builders who need a different bus standard or a higher cache capacity will need another model.
Highlights
- 6 Gb/s SAS throughput accelerates storage arrays
- PCIe 2.0 host interface fits legacy servers
- 1 GB non-volatile cache protects write data
- PERC H810 firmware simplifies RAID management
Specifications
| Brand | Dell |
|---|
Questions about this item
What does the 6 Gb/s SAS rating mean once the card is installed in a server?
Each attached SAS drive can transfer up to 6 Gb/s, so total throughput scales with the number of drives and the RAID level you configure.
How does the PCIe 2.0 interface limit the H810 in practice?
The x8 PCIe 2.0 link caps the controller at about 4 GB/s aggregate bandwidth, which becomes the ceiling for all RAID arrays behind the card.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
