We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat grey SAS cable with straight connectors, 22 inches long

DELL

DELL P110M Perc H700I SAS Cable 22In 56Cm

SKU CH-AGN7-BHRN4

Connects a Perc H700I controller to a PowerEdge R710 backplane with a 22-inch SAS cable

  • SAS cable connects PERC H700I controller to R710 backplane
  • 22-inch (56 cm) length suits standard server chassis
  • Genuine Dell P110M part ensures exact fit
  • New condition guarantees reliable signal integrity
  • Lightweight 5.1-ounce design simplifies internal routing

Perc H700I SAS Cable for PowerEdge Servers

This 22-inch SAS cable connects a Dell Perc H700I controller to the backplane in compatible PowerEdge systems. It is designed for administrators who need a direct replacement link between the RAID card and the drive enclosure. The part number P110M identifies the correct assembly for supported configurations.

Replacing Damaged or Missing Controller Links

Use this cable when the original H700I-to-backplane connection is lost, frayed or absent during a server rebuild. The jump is worth it whenever the existing lead prevents the controller from detecting drives or causes intermittent SAS errors. No other length or connector variant is supplied for this specific controller-to-R710 backplane path.

Integration Into a PowerEdge Chassis

The 56 cm length routes cleanly inside the chassis without excess slack that blocks airflow. It frees up routing space by matching the factory cable path between the controller slot and the backplane. The assembly requires a compatible Perc H700I card and a matching backplane; it does not adapt to different controller generations or external enclosures.

Highlights

  • SAS cable connects PERC H700I controller to R710 backplane
  • 22-inch (56 cm) length suits standard server chassis
  • Genuine Dell P110M part ensures exact fit
  • New condition guarantees reliable signal integrity
  • Lightweight 5.1-ounce design simplifies internal routing

Specifications

BrandDELL

Questions about this item

What length SAS cable is needed to connect the Perc H700I controller to the R710 backplane?

The cable measures 22 inches or 56 centimetres, matching the factory specification for the H700I-to-R710 link.

Which connector orientation on the Perc H700I cable is correct for the controller header?

Align the keyed SAS plug with the controller header notch; forcing it backwards bends pins and prevents the latch from engaging.

When should the Perc H700I SAS cable be replaced in a PowerEdge server?

Replace the cable if the latch clips snap, the jacket shows cuts near the 22-inch run, or drive errors appear on the H700I controller logs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.