DELL
DELL NEC PX750U2 OEM Replacement Projector Lamp 400W
New 400 W UHP replacement lamp module with 2,000–3,000 hour life for NEC projectors
- TypeUHP
- Wattage400W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- New Philips UHP 400W bulb powers bright projection
- Ready-to-install housing enables quick lamp replacement
- 2,000 normal hours extends maintenance intervals
- 3,000 economy hours reduces operating costs
- ISO 9001 manufacturing ensures consistent quality
OEM Replacement Lamp for NEC PX750U2
The DELL NEC PX750U2 OEM Replacement Projector Lamp is a complete module with a new Philips UHP 400W bulb pre-installed in its housing. It is built for technicians and venue operators who need a drop-in replacement for the NP22LP part without assembling components themselves.
400 Watt UHP Bulb Power
The single specification that determines compatibility is the 400W UHP lamp type matched to the NEC PX750U2 projector. Only a module rated at this exact wattage and technology will strike correctly and maintain the projector's designed brightness and colour balance.
Rated Life Under Continuous Use
In normal mode the lamp is rated for 2000 hours of operation before brightness drops below specification. Switching to economy mode extends the rated life to 3000 hours by reducing output, which lowers thermal stress on the bulb and housing during long daily duty cycles.
Highlights
- New Philips UHP 400W bulb powers bright projection
- Ready-to-install housing enables quick lamp replacement
- 2,000 normal hours extends maintenance intervals
- 3,000 economy hours reduces operating costs
- ISO 9001 manufacturing ensures consistent quality
Specifications
| Brand | NEC |
|---|---|
| Type | UHP |
| Wattage | 400W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How bright will the 400W UHP lamp be once installed in my projector?
The 400W UHP bulb delivers the rated lumen output for the PX750U2, matching the projector's original specification for normal and economy modes.
Does the NP22LP module use a standard lamp connector or a proprietary interface?
The module uses the factory connector designed for NEC projectors, ensuring direct electrical and communication compatibility with the PX750U2.
Will the assembled NP22LP housing fit the PX750U2 lamp cage without modification?
Yes, the bulb and housing are fully assembled to the original NP22LP dimensions, so the unit slides into the existing lamp compartment and locks in place.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



