We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL NEC NP600J OEM Replacement Projector Lamp 210W

SKU CH-Y834-XTTVB

A 210W Ushio NSH bulb in a ready-to-install housing rated for 3,000 normal or 4,000 economy hours

  • TypeNSH
  • Wattage210W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • Ready-to-install module with bulb and housing
  • 210 W NSH lamp powers bright projection
  • 3,000 hours normal or 4,000 hours economy life
  • Manufactured to ISO 9001 quality standards
  • Genuine Ushio bulb inside for reliable ignition

Genuine Ushio NSH 210W lamp module

This replacement lamp uses a new Ushio NSH 210W bulb inside a complete housing. It is built for NEC projectors that accept the NP600J module and arrives fully assembled for immediate use.

Restores original brightness after 3000 to 4000

The lamp replaces a dim or expired module once the projector has reached its rated life of 3000 hours in normal mode or 4000 hours in economy mode. The jump is worth it when image quality drops below presentation standards.

Tool-free swap in seconds

The pre-assembled housing slides into the projector without tools or alignment steps. The only common issue is forgetting to reset the lamp-hour counter in the menu after installation.

Highlights

  • Ready-to-install module with bulb and housing
  • 210 W NSH lamp powers bright projection
  • 3,000 hours normal or 4,000 hours economy life
  • Manufactured to ISO 9001 quality standards
  • Genuine Ushio bulb inside for reliable ignition

Specifications

BrandNEC
TypeNSH
Wattage210W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

Will the NP600J lamp module with its pre-assembled housing fit directly into my NEC projector without extra brackets?

The NP600J lamp is supplied as a complete bulb-and-housing assembly designed to slot straight into compatible NEC projectors, so no additional brackets are required.

What is the correct sequence for installing the NP600J lamp, and which step do users most often miss?

Power off and unplug the projector, let it cool completely, remove the lamp cover, slide out the old module, insert the new NP600J unit until it clicks, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most frequently forgotten.

When should I plan to replace the Ushio NSH 210W bulb inside the NP600J module?

Expect roughly 3,000 hours in normal mode or 4,000 hours in economy mode before the lamp reaches end of life and requires a new module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.