DELL
DELL NEC NP22LP Projector Lamp 400W UHP
Genuine 400 W UHP lamp module rated for 2,000 normal or 3,000 economy hours, supplied as a complete housing for direct NEC projector installation
- TypeUHP
- Wattage400W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with genuine Philips 400W UHP bulb
- Up to 3,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
- Compatible replacement for NEC NP-PX800X2 projectors
NEC NP22LP Lamp Identity
The NEC NP22LP is a 400 W UHP replacement lamp module built for the NEC NP-PX800X2 projector. It ships as a complete bulb-and-housing assembly so installation requires no extra tools or alignment steps.
Fit and Alternatives
This lamp suits owners of the NP-PX800X2 who need a direct OEM-specification replacement manufactured to ISO 9001 quality checks. Buyers who want a lower-cost compatible unit or a higher-wattage option should look at something else.
Sustained Operation
Rated life reaches 2,000 hours in normal mode and 3,000 hours in economy mode, reflecting performance under continuous use rather than brief test cycles. The 400 W UHP bulb maintains stable ignition and voltage throughout the rated interval.
Highlights
- Ready-to-install module with genuine Philips 400W UHP bulb
- Up to 3,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
- Compatible replacement for NEC NP-PX800X2 projectors
Specifications
| Brand | NEC |
|---|---|
| Type | UHP |
| Wattage | 400W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which NEC projector models accept the NP22LP lamp module?
The NP22LP module is built for the NEC NP-PX800X2 projector; verify your model number matches before ordering.
Will the 400 W UHP bulb change brightness or colour balance compared with the original lamp?
The replacement uses a Philips 400 W UHP bulb rated for 2 000 hours normal or 3 000 hours economy mode, matching the original specifications.
How can I confirm the new lamp is recognised and the hour counter has reset?
After installation, open the projector menu and check that the lamp-hour counter reads zero and the status shows normal operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



