DELL
DELL NEC NP-P350WJL Projector Lamp 265W
A 265W UHP replacement lamp module rated for 3,000 normal or 3,500 economy hours, supplied fully assembled for straightforward installation
- TypeUHP
- Wattage265W
- Lamp Life3,000 (Normal) - 3,500 (Economy) Hrs.
- Genuine compatible lamp fits NEC projectors
- 265W UHP bulb powers bright projection
- 3000 hours normal mode extends use
- 3500 hours economy mode saves energy
- ISO9001 manufacturing ensures reliable performance
Genuine 265W UHP replacement lamp
The NEC NP-P350WJL module supplies a new 265W UHP bulb inside a complete housing. It is built for NEC projectors that require the NP17LP lamp code and arrives ready to fit without extra assembly.
Replaces a dim or expired NP17LP module
Swap the old lamp when brightness drops below usable levels or the projector warning indicates end of life. The jump is worth it when the existing unit has reached the 3,000-hour normal rating or the 3,500-hour economy rating and image quality has faded.
Tool-free housing swap in minutes
The fully assembled housing slides into the projector lamp bay and locks without screws. The only common issue is forgetting to reset the lamp-hour counter in the projector menu after installation, which leaves the replacement warning active.
Highlights
- Genuine compatible lamp fits NEC projectors
- 265W UHP bulb powers bright projection
- 3000 hours normal mode extends use
- 3500 hours economy mode saves energy
- ISO9001 manufacturing ensures reliable performance
Specifications
| Brand | NEC |
|---|---|
| Type | UHP |
| Wattage | 265W |
| Lamp Life | 3,000 (Normal) - 3,500 (Economy) Hrs. |
Questions about this item
What housing does the NP-P350WJL lamp module use so I know it fits my NEC projector?
The lamp ships as a fully assembled bulb and housing unit built to the NP17LP form factor, so it drops straight into the NEC projector without separate parts.
What is the correct sequence to install the NP-P350WJL module and which step is most often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide the old module out, insert the new NP-P350WJL unit until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most people forget.
When should I plan to replace the 265W UHP bulb based on the rated hours?
Expect about 3,000 hours in normal mode or 3,500 hours in economy mode before brightness drops enough to warrant a new lamp module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



