DELL
DELL NEC M271W NP15LP Projector Lamp 185W NSHA
A complete 185 W NSHA lamp module rated for 5,000 to 6,000 hours, supplied in a ready-to-install housing
- TypeNSHA
- Wattage185W
- Lamp Life5,000 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- NSHA 185W bulb delivers bright projection
- Up to 6,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Compatible with NEC M271W projector models
Compatible Projector Lamp
The DELL NEC M271W NP15LP is a new replacement projector lamp module supplied with a fully assembled NSHA 185W bulb and housing. It is designed for users who need a direct replacement for a failed or dimming lamp in their NEC projector. The unit arrives ready for installation without additional assembly.
Lamp Specification
The critical specification is the NSHA 185W bulb type, which must match the original lamp requirements of the projector. Rated life is 5,000 hours in normal mode and 6,000 hours in economy mode, providing a clear expectation for replacement intervals.
Installation and Pitfalls
Installation involves opening the projector lamp door, removing the old module, and inserting the new assembly until it seats firmly. A common issue is forgetting to reset the projector's lamp-hour counter after replacement, which can cause premature shutdown warnings. Ensure the housing clicks securely into place to avoid connection faults.
Highlights
- Ready to install with pre-assembled bulb and housing
- NSHA 185W bulb delivers bright projection
- Up to 6,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Compatible with NEC M271W projector models
Specifications
| Brand | NEC |
|---|---|
| Type | NSHA |
| Wattage | 185W |
| Lamp Life | 5,000 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
What brightness does the 185W NSHA lamp deliver once installed in an NEC M271W projector?
The 185W NSHA bulb provides the standard light output specified for the M271W, matching the projector's original brightness performance.
Does the NP15LP module use a proprietary connector or a standard lamp interface?
It uses the exact proprietary plug and housing alignment designed for the NEC M271W, so no adapter or modification is required.
What clearance and mounting points does the assembled housing need inside the projector?
The complete module fits the M271W lamp cavity and secures with the projector's original screw positions, requiring no extra brackets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



