We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch SATA hard drive with circuit board visible

DELL

DELL N36YX 4TB 7.2K SATA 3.5" 6Gbps internal hard drive

SKU CH-9NDK-TB5ZB

A 4 TB desktop hard drive with a 7200 RPM spindle and SATA 6.0 Gb/s interface in a 3.5-inch form factor

  • InterfaceSATA 6.0Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 4TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • SATA 6.0Gb/s interface provides high throughput
  • 5-inch form factor fits standard desktop bays
  • New condition ensures full manufacturer reliability

Purpose-built storage

The Dell N36YX is a 4TB 3.5-inch internal hard drive designed for desktop systems that need large-capacity bulk storage. It suits users who archive media libraries, keep local backups or run workloads where sequential throughput matters more than random access speed.

Thermals and acoustics

At 7200 RPM the drive generates moderate heat and audible seek noise typical of performance-class desktop disks. Power draw scales with the SATA 6.0Gb/s interface during active transfers, while idle consumption drops to a low level suitable for always-on desktop operation.

Sustained workload behaviour

Continuous write or read sessions keep the platters spinning at full speed, so temperatures stabilise above idle but remain within normal desktop drive limits. The mechanical actuator produces a steady acoustic signature during long transfers, and throughput holds close to the SATA interface ceiling without the thermal throttling seen in smaller form factors.

Highlights

  • 4TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers quick file access
  • SATA 6.0Gb/s interface provides high throughput
  • 5-inch form factor fits standard desktop bays
  • New condition ensures full manufacturer reliability

Specifications

InterfaceSATA 6.0Gb/s
Capacity4TB
RPM7200 RPM
Form Factor3.5"

Questions about this item

How do I install the 3.5" SATA 6.0Gb/s drive and which step is often missed?

Mount the drive in a 3.5" bay, connect the SATA data cable to the motherboard port and the SATA power cable from the PSU; the step often missed is securing both cable ends firmly so they do not work loose.

What maintenance or replacement will the 7200 RPM 4TB drive need later?

No routine maintenance is required; keep the system dust-free and monitor SMART attributes — if reallocated sectors or seek errors rise, plan a replacement.

What limit appears first on the 7200 RPM SATA drive during sustained transfers?

The sustained transfer rate is capped by the 7200 RPM mechanical throughput and the SATA 6.0Gb/s interface ceiling, whichever is lower for the workload.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.