We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver metal 3.5 inch drive trays with green circuit boards

DELL

DELL KG7NR 3.5" HDD Tray Caddy for PowerEdge R320 146GB Lot of 2

SKU CH-XYJ2-F396Q

3.5" HDD tray caddies for Dell PowerEdge R320 servers, supplied as a lot of two

  • Type2 Post Open Frame Rack
  • Fits Dell PowerEdge R320 3.5" bays
  • Includes two caddies for dual-drive setup
  • Supports SAS and SATA 2.5" drives
  • Compatible with R610 T610 R620 R710 T710 R720 R815 R820
  • New condition ready for immediate installation

KG7NR 3.5" HDD Tray Caddy Lot

This lot supplies two DELL KG7NR trays built for 3.5-inch drive bays in PowerEdge R320 servers. Each caddy accepts 2.5-inch SAS or SATA hard drives and carries the 146GB label from the original configuration. The pair lets you populate matching slots in a single service window.

Suits R320 bays; not for 2.5" chassis

These trays fit the 3.5-inch front panel openings of the PowerEdge R320. They will not seat in servers that only provide 2.5-inch drive cages, such as the R610, R620, R630, R710, T710, R720, R815, R820, R730XD or T610. Buyers needing caddies for those narrower bays should look for the 2.5-inch form factor instead.

SAS and SATA drive interface support

The caddy backplane connector is wired for both SAS and SATA protocols, so any 2.5-inch drive using either interface will communicate with the R320 backplane. No other interface types are supported by this tray design.

Highlights

  • Fits Dell PowerEdge R320 3.5" bays
  • Includes two caddies for dual-drive setup
  • Supports SAS and SATA 2.5" drives
  • Compatible with R610 T610 R620 R710 T710 R720 R815 R820
  • New condition ready for immediate installation

Specifications

Type2 Post Open Frame Rack

Questions about this item

How do I install the KG7NR tray caddy in a PowerEdge R320, and which step is often missed?

Slide the 2.5" SAS or SATA drive into the tray, secure it with the screws provided, then insert the assembly into the 3.5" bay until the latch clicks — the latch click is the step most people miss.

What maintenance or replacement will the KG7NR tray caddy need over time?

The tray itself has no moving parts; only the drive inside may need replacement if it fails or if capacity must be increased.

What limit appears first when the KG7NR tray caddy is used continuously in a PowerEdge server?

The drive's own thermal and endurance limits will be reached before the passive tray shows any wear.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.