We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat orange ribbon cable with connectors at both ends, new condition

DELL

DELL Inspiron 15 5582 2-in-1 Fingerprint Reader Ribbon Cable Accessory

SKU CH-DTX4-XA1PP

Genuine Dell OEM ribbon cable connecting the fingerprint reader to the power button board on Inspiron 15 5582 2-in-1 laptops

  • Genuine Dell OEM part ensures reliable fingerprint reader connection
  • Connects fingerprint module to power button board on Inspiron 5582 2-in-1
  • Designed specifically for Dell Inspiron 15 5582 2-in-1 models
  • Replaces original ribbon cable with part numbers Bucky15-FP-FFC and 450.0F801.0011
  • New condition component ready for installation in compatible laptops

Dell Inspiron 5582 2-in-1 Fingerprint Cable

This genuine Dell OEM ribbon cable connects the fingerprint reader module to the power button board on the Inspiron 15 5582 2-in-1 laptop. It restores biometric login when the original flex cable is damaged or worn. The part number is 450.0F801.0011. ||

Replaces Broken Fingerprint Reader Flex

The cable replaces a torn or loose original flex that stops the fingerprint sensor from communicating with the motherboard. Swapping it is worthwhile when the reader stops being detected in Windows or the sensor LED never lights. No other repair brings the reader back if the flex itself is the failure point. ||

Check Connector Orientation Before Order

Verify the laptop is an Inspiron 15 5582 2-in-1; other 5582 chassis variants use a different cable. Confirm the fingerprint reader sits on the power button board and uses a flat ribbon connector matching the pictured part. Buyers without a 2-in-1 hinge design cannot use this cable.

Highlights

  • Genuine Dell OEM part ensures reliable fingerprint reader connection
  • Connects fingerprint module to power button board on Inspiron 5582 2-in-1
  • Designed specifically for Dell Inspiron 15 5582 2-in-1 models
  • Replaces original ribbon cable with part numbers Bucky15-FP-FFC and 450.0F801.0011
  • New condition component ready for installation in compatible laptops

Specifications

BrandDell

Questions about this item

Does this cable fit the Inspiron 15 5582 2-in-1 chassis?

Yes, it is a genuine Dell OEM ribbon cable made for the Inspiron 15 5582 2-in-1 and connects the fingerprint reader module to the power button board.

How is the ribbon cable installed, and what step is often missed?

Route the flat cable through the hinge channel, seat both ZIF connectors fully, then flip each locking bar down; the step most often missed is locking the bars before tightening the board screws.

When should this ribbon cable be replaced?

Replace it if the fingerprint reader stops being detected, shows intermittent errors, or the cable shows creases or torn traces after a hinge repair or liquid spill.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.