We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with four RJ45 ports and gold edge connector

DELL

DELL Broadcom 57454 10Gb Quad Port RJ45 OCP 3.0 W5HC8 network card

SKU CH-35XE-ZN6DX

Adds four 10 Gb RJ45 ports via OCP 3.0 to compatible Dell PowerEdge servers

  • TypeRack
  • Quad-port design delivers four 10 Gb links for dense server I/O
  • OCP 3.0 form factor fits Dell PowerEdge R650, R750 and R760 chassis
  • Broadcom 57454 controller provides hardware offload to reduce CPU load
  • RJ45 copper ports use existing Cat6a cabling for cost-effective 10 GbE
  • Tested with updated firmware for immediate deployment in compatible racks

Dell Broadcom 57454 quad-port adapter

The Dell Broadcom 57454 is a 10Gb quad-port RJ45 network card built to the OCP 3.0 specification. It targets administrators adding high-density 10 Gigabit Ethernet to compatible Dell PowerEdge servers such as the R650, R750, R760 and R960 families.

OCP 3.0 form factor limits deployment

The card uses the OCP 3.0 mezzanine form factor, so it only fits servers with an available OCP 3.0 slot. Bandwidth is capped at 10 Gbps per port over copper RJ45 cabling, and the four ports share the single PCIe interface provided by the slot.

Server-grade build for rack environments

The assembly is validated for Dell PowerEdge rack platforms including the C6520, C6525, R650xs, R6525, R660XS, R6615, R6625, R750xa, R750xs, R7525, R760xa, R760XD2, R760xs, R7615, R7625 and R860. RJ45 connectors use standard twisted-pair patch cords, simplifying cabling in existing copper infrastructures. Buyers needing fibre interfaces or additional ports beyond four must select a different adapter.

Highlights

  • Quad-port design delivers four 10 Gb links for dense server I/O
  • OCP 3.0 form factor fits Dell PowerEdge R650, R750 and R760 chassis
  • Broadcom 57454 controller provides hardware offload to reduce CPU load
  • RJ45 copper ports use existing Cat6a cabling for cost-effective 10 GbE
  • Tested with updated firmware for immediate deployment in compatible racks

Specifications

BrandDELL
ModelBCM957454-N410SDBT, JJNC9, 540-BDQQ
TypeRack

Questions about this item

Should I pick the BCM957454-N410SDBT or the JJNC9 version?

Both part numbers refer to the same Dell Broadcom 57454 quad-port adapter; choose the one that matches your Dell PowerEdge service tag.

What does the 10Gb rating deliver inside a PowerEdge R760?

Each of the four RJ45 ports runs at 10 Gb/s, giving 40 Gb/s aggregate throughput when all ports are active.

How does the OCP 3.0 form factor limit installation options?

The card fits only OCP 3.0 mezzanine slots in compatible PowerEdge servers such as the R650, R760 or R960.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.