We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell battery cable for LSI MegaRaid 9265 RAID controller

DELL

DELL Battery Cable for LSI MegaRaid 9265 RAID Controller H8TR7 accessory

SKU CH-9QVA-4VW0G

Battery cable connecting the LSI MegaRaid 9265 RAID controller to its cache battery

  • Genuine Dell OEM part ensures controller compatibility
  • Battery cable powers RAID cache backup module
  • Designed for LSI MegaRAID 9265 controller cards
  • Replaces Dell part number H8TR7

Purpose-Built Cable for RAID Controller Battery

This Dell battery cable connects the backup battery to an LSI MegaRaid 9265 expandable RAID controller card. It is a genuine OEM accessory designed for server administrators and IT technicians maintaining compatible Dell storage configurations. The part number H8TR7 identifies the exact replacement for a damaged or missing original cable. Buyers who need a different connector pin-out or a cable for another controller model cannot use this item.

Passive Component with No Power Draw

The cable itself carries only low-voltage signalling between the battery module and the controller, so it adds no measurable heat, noise or electrical load to the system. Thermal performance and acoustics are determined entirely by the controller card and chassis airflow, not by this accessory. Installation requires routing the cable inside the server enclosure according to the chassis layout. No external power connection or driver is involved.

Highlights

  • Genuine Dell OEM part ensures controller compatibility
  • Battery cable powers RAID cache backup module
  • Designed for LSI MegaRAID 9265 controller cards
  • Replaces Dell part number H8TR7

Specifications

BrandDell

Questions about this item

How do I install the H8TR7 battery cable on my LSI MegaRaid 9265 controller?

Connect the H8TR7 cable to the dedicated battery header on the LSI MegaRaid 9265 controller and attach the other end to the RAID backup battery module. Ensure the connector is fully seated to avoid intermittent contact.

When should I replace the H8TR7 battery cable for my 9265 RAID card?

Replace the H8TR7 cable if the connector pins are bent, the insulation is cracked, or the controller reports battery failures despite a healthy battery module. Physical damage during hardware swaps is the most common cause.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.