DELL
DELL AP-ANT-17 network antenna 2.4/5 GHz 5-6 dBi 270° 3×RPSMA 50 Ω
Dual-band MIMO antenna covers 2.4 and 5 GHz sectors with 5-6 dBi gain, 270° horizontal beamwidth, and three RPSMA connectors
- Dual-band 2.4/5 GHz coverage for flexible wireless deployment
- 270° horizontal beamwidth provides wide sector coverage
- 5-6 dBi gain strengthens signal reach across distances
- Three RPSMA connectors support MIMO antenna configurations
- 50 Ω impedance with 1.7:1 VSWR ensures efficient signal transfer
Dual-band MIMO antenna for 2.4 and 5 GHz
The Dell AP-ANT-17 is a multi-polarised antenna built for sector coverage across the 2400-2500 MHz and 4900-5875 MHz bands. It delivers 6 dBi gain at 2.4 GHz and 5 dBi gain at 5 GHz with a 270-degree horizontal beamwidth. Designed by Aruba Networks, it suits indoor or outdoor deployments needing wide-area wireless reach.
Three RPSMA ports and 50-ohm impedance
The antenna terminates in three reverse-polarity SMA connectors, enabling direct attachment to compatible access points or radios. A 1.7:1 VSWR indicates a good impedance match across both bands. Its 7.9 by 1.3 by 7.9 inch form factor and 90-degree vertical beamwidth support pole or wall mounting for fixed sector installations.
Upgrades basic dipole or single-polarity antennas
This unit replaces omnidirectional dipoles when wider horizontal coverage and MIMO capability are required. The jump is worth it for networks that need consistent sector patterns and dual-band operation from a single radome. It is not suited for point-to-point links needing narrow beamwidths or for installations requiring integrated cabling.
Highlights
- Dual-band 2.4/5 GHz coverage for flexible wireless deployment
- 270° horizontal beamwidth provides wide sector coverage
- 5-6 dBi gain strengthens signal reach across distances
- Three RPSMA connectors support MIMO antenna configurations
- 50 Ω impedance with 1.7:1 VSWR ensures efficient signal transfer
Specifications
| Brand | Dell |
|---|
Questions about this item
What frequency bands does the AP-ANT-17 antenna cover?
The antenna operates on 2.4 GHz (2400-2500 MHz) and 5 GHz (4900-5875 MHz) bands, providing dual-band coverage for compatible access points.
What are the physical dimensions and mounting requirements for the AP-ANT-17?
The antenna measures 7.9 in wide, 7.9 in high, and 1.3 in deep, designed for indoor or outdoor sector mounting with a 270° horizontal beamwidth.
How do you connect the three RPSMA ports on the AP-ANT-17, and what is the common mistake?
Connect all three RPSMA connectors to the corresponding MIMO radio ports; the common error is leaving one port unused or mismatching polarisation, which reduces diversity gain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
