We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat beige ribbon cable with folded ends and gold contacts

DELL

DELL Alienware 18 R1 Touchpad Ribbon Cable VAS10 NBX0001B700 accessory

SKU CH-JQ4B-EWQGC

Genuine Dell OEM ribbon cable connecting the touchpad assembly to the junction board for Alienware 18 R1 laptops

  • Genuine Dell OEM part ensures exact fit for Alienware 18 R1
  • Connects touchpad assembly to junction board restoring full pointer control
  • New condition guarantees reliable performance without wear
  • Verified compatibility with Alienware 18 R1 laptop models

Genuine Dell OEM touchpad ribbon cable

This is a genuine Dell OEM replacement ribbon cable for the Alienware 18 R1 laptop. It connects the touchpad assembly directly to the junction board. The part carries Dell numbers VAS10 and NBX0001B700. It is intended for owners repairing a faulty touchpad connection on this specific model.

Passive component with no thermals or power draw

The ribbon cable is a passive flex circuit that carries only low-voltage signals between the touchpad and the mainboard. It generates no heat, produces no noise and draws no measurable power during normal operation. No active cooling or external power supply is required for this part.

Highlights

  • Genuine Dell OEM part ensures exact fit for Alienware 18 R1
  • Connects touchpad assembly to junction board restoring full pointer control
  • New condition guarantees reliable performance without wear
  • Verified compatibility with Alienware 18 R1 laptop models

Specifications

BrandDell

Questions about this item

How do I install the Alienware 18 R1 touchpad ribbon cable and what step is often missed?

Disconnect the battery first, then route the cable from the touchpad assembly to the junction board and seat the ZIF connectors fully; the step often missed is forgetting to flip the locking tabs back down after insertion.

What maintenance or replacement will the Alienware 18 R1 touchpad ribbon cable need later?

No scheduled maintenance is required; replace the cable only if the touchpad becomes intermittent or fails, which typically happens after physical stress or repeated flexing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.