DELL ADP-200100 200W 19.5V 10.3A 4.5mm Blue Tip AC Adapter
Delivers 200 W at 19.5 V with a 4.5 mm blue tip for compatible HP Victus, Omen, ZBook and Pavilion laptops
- CompatibilityLaptops
- Battery Voltage20V
- AC Adapter Voltage20V
- AC Adapter Current11.8A
- FeaturesFast Charging, 2-Pin, 20 volts_of_direct_current, 7.5 amps
- Delivers 200 W for demanding workloads with 19.5 V 10.3 A output
- Replaces 150 W and 135 W units using the same 4.5 mm Blue Tip connector
- Works worldwide on 100‑240 V 50‑60 Hz mains without a voltage switch
- Protects hardware with built‑in short‑circuit, over‑voltage, over‑current and over‑temperature safeguards
- Fits a wide range of HP Victus, Omen, Pavilion, ZBook and Envy models listed by part number
Dell ADP-200100 200W AC Adapter
This Dell ADP-200100 is a 200W AC adapter delivering 19.5V at 10.3A through a 4.5mm Blue Tip connector. It replaces HP part numbers such as L00818-850 and ADP-200HB for compatible laptops. The unit accepts 100-240V input at 50-60Hz for worldwide use. Multiple safety protections guard against short circuit, overvoltage, overcurrent and overheating.
Suitable For HP Victus Omen ZBook Users
Buyers needing a 200W replacement charger for listed HP Victus, OMEN, Pavilion Gaming and ZBook models will find the correct voltage and connector here. It also covers lower-wattage 135W and 150W requirements thanks to the compatible output range. Users whose laptops demand a different connector size, a higher current rating or a USB-C power delivery profile should look at other options.
4.5mm Blue Tip Connector Decides Fit
The 4.5mm x 3.0mm Blue Tip connector is the single specification that determines whether this adapter fits the laptop. Match this connector and the 19.5V 10.3A output against the original charger label before purchasing. The adapter supports 200W maximum output and is backward compatible with 135W and 150W systems. No other specification overrides this physical and electrical match.
Highlights
- Delivers 200 W for demanding workloads with 19.5 V 10.3 A output
- Replaces 150 W and 135 W units using the same 4.5 mm Blue Tip connector
- Works worldwide on 100‑240 V 50‑60 Hz mains without a voltage switch
- Protects hardware with built‑in short‑circuit, over‑voltage, over‑current and over‑temperature safeguards
- Fits a wide range of HP Victus, Omen, Pavilion, ZBook and Envy models listed by part number
Specifications
| Brand | DELL |
|---|---|
| Model | ADP-200100 |
| Compatibility | Laptops |
| Battery Voltage | 20V |
| AC Adapter Voltage | 20V |
| AC Adapter Current | 11.8A |
| Features | Fast Charging, 2-Pin, 20 volts_of_direct_current, 7.5 amps |
Questions about this item
Will the 200W output run my laptop at full performance while charging?
Yes, the adapter delivers 19.5V at 10.3A for 200W, matching the power draw of supported HP Victus, Omen, Pavilion Gaming and ZBook models under load.
Does the 4.5mm blue-tip connector limit charging speed on any listed models?
No, the 4.5mm x 3.0mm blue-tip plug is the native connector for every compatible part number listed, so the full 200W is available.
What clearance does the brick need for the 2-pin mains lead?
The adapter body is a standard rectangular brick; the 2-pin IEC C7 inlet sits on one short side, so allow a few centimetres behind it for the mains cable bend.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



