We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver server PSU with handle and vented grille

DELL

DELL A502P-00 502W Server Power Supply for PowerEdge R610

SKU CH-84AN-ZP5C4 MPN A502P-00

502W hot-swap redundant PSU for PowerEdge R610 servers, genuine Dell OEM replacement

  • Hot-swap design enables replacement without server downtime
  • 502 Watt output powers PowerEdge R610 configurations
  • Genuine Dell OEM part ensures exact fit
  • Redundant supply architecture protects against single-point failure
  • Compatible with part numbers MU791 DXWMN J38MN KY091 8V22F

Genuine Dell 502W Server PSU

The Dell A502P-00 is a new 502 Watt switching power supply built as an original genuine Dell replacement part. It is designed for administrators and technicians maintaining PowerEdge R610 servers who require a direct OEM unit. The unit carries Dell part numbers MU791, DXWMN, J38MN, KY091 and 8V22F.

502 Watt maximum output power

The single specification that decides fit is the 502 Watt maximum output rating matched to the PowerEdge R610 platform. Only a supply rated at this exact wattage and form factor will satisfy the server's power budget and redundancy requirements. Verifying the 502W figure against the system label confirms the correct part.

Hot-swap redundant module for R610

This module slides into the PowerEdge R610 hot-swap bay, allowing replacement without powering down the chassis when a second unit is installed for redundancy. It frees the administrator from scheduling downtime for a PSU swap and maintains continuous operation during hardware maintenance. The redundant design supports fault-tolerant power delivery.

Highlights

  • Hot-swap design enables replacement without server downtime
  • 502 Watt output powers PowerEdge R610 configurations
  • Genuine Dell OEM part ensures exact fit
  • Redundant supply architecture protects against single-point failure
  • Compatible with part numbers MU791 DXWMN J38MN KY091 8V22F

Specifications

No published specifications for this item yet.

Questions about this item

What does the 502 W rating actually deliver inside a PowerEdge R610?

The 502 W figure is the maximum continuous output the unit can supply to the R610's motherboard, CPU, memory and drives under full load.

Which connector standard does the A502P-00 use to plug into the R610 chassis?

It uses the Dell proprietary hot-swap PSU connector that mates directly with the R610's redundant power backplane.

What physical slot does this PSU occupy in the R610?

It slides into one of the two hot-swap power supply bays at the rear of the 1U R610 chassis.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.