DELL
DELL 8TB 7.2K SAS 3.5" 12Gb/s HDD with Tray
An 8 TB SAS hard drive spinning at 7.2 K RPM in a 3.5-inch hot-plug tray for internal server storage
- Enterprise-grade 8 TB capacity for bulk data storage
- SAS 12 Gb/s interface delivers high-throughput enterprise connectivity
- 2 K RPM spindle speed balances performance with nearline efficiency
- 512e advanced format optimises density and compatibility
- Hot-plug tray enables drive swaps without system downtime
Dell 8TB SAS 12Gb/s Enterprise Drive
This Dell 8TB 3.5-inch nearline SAS hard drive spins at 7.2K RPM and connects through a 12Gb/s interface. It uses 512e advanced format and ships in a genuine Dell F238F hot-plug tray with Dell firmware and serial number. The drive is built for hot-swap operation inside compatible Dell servers and storage arrays.
Suited for Enterprise SAS Bays Only
This drive fits servers and storage enclosures that accept 3.5-inch SAS hot-plug trays and run 12Gb/s SAS backplanes. It will not work in desktop PCs, laptops or consumer NAS units that only provide SATA ports or lack the required tray mechanism. Buyers needing SATA connectivity or a bare drive without a tray should look at a different model.
Check Backplane and Tray Compatibility First
Verify that your system supports 3.5-inch SAS hot-plug drives at 12Gb/s and uses the Dell F238F tray form factor. Confirm the controller firmware recognises 512e advanced-format drives and that an empty hot-plug bay is available. Without a matching SAS backplane and the correct tray the drive cannot be installed or detected.
Highlights
- Enterprise-grade 8 TB capacity for bulk data storage
- SAS 12 Gb/s interface delivers high-throughput enterprise connectivity
- 2 K RPM spindle speed balances performance with nearline efficiency
- 512e advanced format optimises density and compatibility
- Hot-plug tray enables drive swaps without system downtime
Specifications
No published specifications for this item yet.
Questions about this item
What server backplane or controller must I already have to accept a 12 Gb/s SAS 3.5-inch drive in a hot-swap tray?
The drive requires a SAS backplane or HBA that supports 12 Gb/s signalling and a 3.5-inch hot-swap bay; SATA-only controllers will not work.
Can the 7.2 K RPM SAS drive share the same 12 Gb/s backplane with older 6 Gb/s SAS or SATA drives?
Yes — the backplane will negotiate each link independently, so 6 Gb/s devices run at their rated speed while this drive runs at 12 Gb/s.
How do I verify the drive is recognised with genuine Dell firmware after installation?
Check the controller BIOS or OS utility for the Dell part number GKWHP and serial number; genuine Dell firmware will be reported alongside the 8 TB capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



