DELL
DELL 725-10046 OEM Replacement Projector Lamp 300W 2000 Hrs
OEM replacement lamp module with 300 W Philips UHP bulb and housing delivers 2,000 hours of projection
- TypeProjector Lamp
- Wattage300W
- Lamp Life2,000 Hrs.
- Ready-to-install module with 300W Philips UHP bulb and housing
- 2000-hour rated lamp life for extended projection time
- Manufactured to ISO 9001 quality standards for reliable performance
- Multiple OEM versions available from Philips, Osram, Ushio and others
- Each unit tested for beam performance, ignition and voltage
Ready-to-install lamp module
The Dell 725-10046 is a new OEM replacement projector lamp supplied as a fully assembled 300W bulb and housing. It fits compatible Dell projectors without extra assembly and is rated for 2000 hours of operation. The module uses a Philips UHP bulb and meets ISO 9001 manufacturing standards.
For owners of matching Dell projectors
This lamp suits anyone whose Dell projector requires the 725-10046 part number and who wants a direct swap with no wiring or alignment work. Buyers needing a different wattage, a bare bulb without housing, or a lamp for a non-Dell model should look elsewhere.
Assembled housing and quality checks
Because the bulb comes pre-mounted in its housing, installation is limited to removing the old module and inserting the new one. Each unit is tested for beam performance, ignition voltage, connections and run-time before shipping, reducing the chance of early failure.
Highlights
- Ready-to-install module with 300W Philips UHP bulb and housing
- 2000-hour rated lamp life for extended projection time
- Manufactured to ISO 9001 quality standards for reliable performance
- Multiple OEM versions available from Philips, Osram, Ushio and others
- Each unit tested for beam performance, ignition and voltage
Specifications
| Brand | Dell |
|---|---|
| Type | Projector Lamp |
| Wattage | 300W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Dell projector models accept the 725-10046 lamp module?
The 725-10046 is a direct replacement for the original lamp supplied with compatible Dell projectors; check your projector’s service manual or the label on the existing lamp to confirm the 725-10046 part number before ordering.
Will the 300 W Philips UHP bulb in this module match the brightness and ignition characteristics of the original lamp?
Yes, the module uses a 300 W Philips UHP bulb built to ISO 9001 standards and tested for beam performance, ignition voltage and run-time, so it reproduces the original lamp’s output in your Dell projector.
How can I verify the new lamp is operating correctly after installation?
Reset the projector’s lamp-hour counter to zero, then confirm the image is stable and bright; the lamp is rated for 2,000 hours of use under normal conditions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



