We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch SAS hard drive with black Dell caddy attached

DELL

DELL 600GB SAS 3.5" 15K 6G Internal Hard Drive

SKU CH-J01P-RK0CF

600 GB SAS drive spins at 15 K rpm and fits 3.5-inch bays in compatible Dell PowerEdge servers

  • 600GB capacity stores large datasets on a single 3.5" drive
  • 15K RPM spindle speed accelerates data access for transaction-heavy workloads
  • SAS 6G interface delivers reliable throughput for server environments
  • Pre-fitted Dell caddy enables direct installation in supported PowerEdge servers
  • Compatible with a wide range of PowerEdge models from R210 through R930

600 GB SAS 15 K drive for Dell servers

This 600 GB SAS hard drive spins at 15 K and uses a 3.5 inch form factor. It is built for Dell PowerEdge servers that accept a 6 G SAS interface. The drive ships with a compatible caddy for direct installation.

Thermals noise and power in normal use

At 15 K spindle speed the drive generates more heat than slower nearline disks, so adequate chassis airflow is required. Typical idle power draw is moderate for a 15 K unit and acoustic output is noticeable but within server-room expectations. The 6 G SAS link keeps interface power low during light workloads.

Behaviour under sustained load

Continuous sequential workloads keep the actuator busy and temperatures rise steadily; the drive relies on the server’s fan wall to maintain safe limits. Write-heavy streams sustain the full 6 G SAS throughput until thermal throttling may engage. Random I/O performance remains consistent as long as the cooling subsystem delivers rated airflow.

Highlights

  • 600GB capacity stores large datasets on a single 3.5" drive
  • 15K RPM spindle speed accelerates data access for transaction-heavy workloads
  • SAS 6G interface delivers reliable throughput for server environments
  • Pre-fitted Dell caddy enables direct installation in supported PowerEdge servers
  • Compatible with a wide range of PowerEdge models from R210 through R930

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 3.5" SAS drive into the Dell caddy for an R210 server?

Slide the drive into the compatible Dell caddy until the SAS connector seats firmly, then secure the caddy screws before inserting the assembly into the server bay.

What maintenance will the 15K SAS drive need over its service life?

No scheduled maintenance is required; monitor SMART attributes for reallocated sectors and replace the drive if error counts rise.

Which limit appears first when the 600GB SAS drive runs sustained write workloads?

The 6 Gbit/s SAS interface bandwidth caps sustained throughput before the 15K RPM mechanics reach their maximum transfer rate.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.