We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3.5 inch SAS hard drive, silver metal casing

DELL

DELL 4TB SAS 7.2K 3.5" 529FG Internal Hard Drive

SKU CH-WT4H-Z8598

A 4 TB SAS desktop drive spinning at 7.2 K RPM in a 3.5 inch form factor

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Dell 4TB SAS 7.2K 3.5" Drive

This Dell 4TB internal hard drive uses a SAS interface and spins at 7.2K RPM in a 3.5 inch form factor. It is built for desktop systems that require high-capacity magnetic storage with a Serial Attached SCSI connection. The drive carries part number 529FG and was first listed by the manufacturer in 2020.

Suited for SAS storage arrays

This drive suits builders adding bulk capacity to a desktop or server that already supports SAS controllers. It is not for systems limited to SATA-only backplanes or laptops that cannot accept a 3.5 inch device. Buyers needing solid-state latency or a smaller 2.5 inch form factor should consider other options.

Single specification: SAS interface

The decisive specification is the SAS interface, which determines controller and backplane compatibility. Verify that your host bus adapter or RAID card presents a SAS port before purchasing. The 4TB capacity and 7.2K spindle speed are secondary to this connectivity requirement.

Highlights

  • 4 TB capacity stores large datasets
  • SAS interface connects to enterprise controllers
  • 2 K spindle speed balances throughput and power
  • 5 inch form factor fits standard drive bays
  • New condition delivers full manufacturer reliability

Specifications

No published specifications for this item yet.

Questions about this item

What drive bay size does the 3.5" SAS drive require?

The drive fits a standard 3.5-inch internal bay and connects via a SAS interface.

How is the 529FG drive installed and what step is often missed?

Mount the drive in a 3.5-inch bay, attach the SAS data and power cables, then enable the SAS controller in BIOS so the drive appears.

When should the 4TB 7.2K SAS drive be replaced?

Replace the drive if SMART errors appear, unusual noise develops, or after the manufacturer's rated service life is exceeded.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.