DELL
DELL 468-8976 projector lamp for M209X M409WX M410HD projectors
Replacement lamp module for Dell M209X, M409WX and M410HD DLP projectors, rated 3000 hours typical and 5000 hours economy mode at 165 W
- TypeProjector Lamp
- CompatibilityDell DLP Projectors: M209X, M409WX, M410HD
- SpecificationsLamp Life:3000 Hour Typical, 5000 Hour Economy Mode Lamp Pow
- Ready to install with pre-assembled bulb and housing
- Fits Dell M209X, M409WX and M410HD projectors
- Typical lamp life of 3000 hours
- Extended 5000-hour life in economy mode
- Operates at 165 watts for consistent brightness
Replacement lamp module
This Dell 468-8976 lamp module is a new, fully assembled bulb and housing for Dell DLP projectors. It is designed for owners of M209X, M409WX and M410HD models who need a direct replacement. The unit arrives ready for installation without additional assembly.
Who this suits
The lamp suits users whose existing module has reached end of life or whose brightness has dropped below usable levels. It is not for buyers who need a lamp for any projector outside the three listed models. It is not for users who require a bare bulb without the housing.
Deciding specification
The rated lamp life is 3000 hours in typical mode and 5000 hours in economy mode at 165 W. Match these figures to your projector's settings and expected usage to confirm the part is correct.
Highlights
- Ready to install with pre-assembled bulb and housing
- Fits Dell M209X, M409WX and M410HD projectors
- Typical lamp life of 3000 hours
- Extended 5000-hour life in economy mode
- Operates at 165 watts for consistent brightness
Specifications
| Brand | Dell |
|---|---|
| Type | Projector Lamp |
| Compatibility | Dell DLP Projectors: M209X, M409WX, M410HD |
| Specifications | Lamp Life:3000 Hour Typical, 5000 Hour Economy Mode Lamp Power:165 W Compatible Devices: DLP |
| Shipping weight | 0.23 kg |
| Package size | 157 × 142 × 97 mm |
Questions about this item
How do I install the 468-8976 lamp module in my M410HD projector, and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new 468-8976 assembly until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.
What maintenance will the 468-8976 lamp need during its 3000-hour typical life?
Clean the projector's air filters every few months to prevent overheating; the lamp module itself is a sealed unit and requires no internal maintenance until it reaches end of life and must be replaced.
At 165 W, what limit appears first during long sessions with the 468-8976?
Heat buildup is the first limit; if filters are clogged or ventilation is restricted, the projector will trigger thermal protection and shut down before the lamp reaches its rated hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



